1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Pulling out D16

Discussion in 'HYBRID -> EG-EK / DC' started by silverboost, Jan 10, 2006.

  1. silverboost

    silverboost Junior Member

    Messages:
    6
    Likes Received:
    0
    Joined:
    Jan 5, 2006
    Im pulling my D16y7 from my 98 coupe, Ive been told that i cant pull the motor without separating the trans first. I wanna know if i dont have to do that and can just disconnect all hoses, belts, mounts etc.. and pull it out the top. Thanks
     
  2. focuscrxsi

    focuscrxsi Member

    Messages:
    34
    Likes Received:
    0
    Joined:
    Dec 14, 2005
    yes u can but u have to take off the crank pulley off and the side mount but yes ur can take it out and leaving the tranny there
     
  3. VTECin5th

    VTECin5th Administrator

    Messages:
    2,182
    Likes Received:
    4
    Joined:
    Apr 17, 2005
    Location:
    Phoenix Az
    Make it vertical more, you can take it out with everything on there.. even the AC compressor.. [​IMG]
     
  4. Chaos325

    Chaos325 Member

    Messages:
    117
    Likes Received:
    0
    Joined:
    Mar 27, 2004
    Location:
    Collingswood, NJ
    heh, I find it easier to drop everything including the tranny at once and from underneath, not through the top.
     
  5. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Yup, you can remove it all as one unit- it's easier. It's also definitely easier as Chaos325 said- drop the engine out of the bottom of the car. If you don't have a lift or you're not willing to lift the front end of your car with the hoist though, just take it out through the top. It's not that hard.
     
Verification:
Draft saved Draft deleted

Share This Page