1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Q45 stoppers?

Discussion in 'Other Vehicle Discussions' started by Smonkeyboy, Jul 20, 2005.

  1. Smonkeyboy

    Smonkeyboy Senior Member

    Messages:
    2,775
    Likes Received:
    5
    Joined:
    Sep 30, 2002
    Location:
    Spokane, WA
    i was looking around for brake upgrades for my 240 the other day and found that fastbrakes sells the Q45 upgrade for $405 with calipers and rotors (no lines) and i can get a 300zx conversion with rotors lines calipers and pads for $495

    does the Q45 come with 4-pots like the 300zx? or should i just pop for the Z brakes

    BattlePope i need your help on this one.
     
  2. Battle Pope

    Battle Pope New Member

    Messages:
    10,279
    Likes Received:
    60
    Joined:
    Jun 22, 2004
    Location:
    Southern Oregon Coast
    I don't know offhand. I'm having the car aligned at the tire shop this friday and I can have them look then. I think it's the same hats as the 300ZX n/a but the rotors are a tiny bit smaller.

    EDIT: get at me on aim, there's somethin I need your help with y0
     
  3. NissanNiNjA2nd

    NissanNiNjA2nd Senior Member

    Messages:
    1,606
    Likes Received:
    8
    Joined:
    Mar 10, 2004
    [​IMG]

    2 piston and they bolt into place
     
  4. Smonkeyboy

    Smonkeyboy Senior Member

    Messages:
    2,775
    Likes Received:
    5
    Joined:
    Sep 30, 2002
    Location:
    Spokane, WA
    bolt into place besides being a different bolt pattern?

    i assume you meant that the brake lines are the same????
     
  5. Battle Pope

    Battle Pope New Member

    Messages:
    10,279
    Likes Received:
    60
    Joined:
    Jun 22, 2004
    Location:
    Southern Oregon Coast
  6. NissanNiNjA2nd

    NissanNiNjA2nd Senior Member

    Messages:
    1,606
    Likes Received:
    8
    Joined:
    Mar 10, 2004


    I mean the calipers bolt to where they are supposed to go, the rotors on the other hand I suggest getting the front and rears and just doing a whole swap over and get away from crappy nissan 4 lugs

    otherwise, you get to get them drilled for your bolt pattern
     
  7. Celerity

    Celerity Well-Known Member

    Messages:
    21,969
    Likes Received:
    146
    Joined:
    Sep 11, 2003
    Wow that's expensive... Budget out the steel lines and source some BAER components for about $50 more.
     
Verification:
Draft saved Draft deleted

Share This Page