quick release & horn issue

[GQMarques]

aight so here's the deal. I bought an NRG quick release hub and a detachable steering wheel off the net. Neither of them came with instructions to connect the horn. the NRG has two male attachments and the steering wheel has a male and female. Not sure how to do this... wiring is definitely not my thing, but its gotta get done soon 'cuz safety check is right around the corner. Ne one have a suggestion? Here's some pix I took ... one of which shows the back end of the quick release.

Thanks,

Marcus

http://i107.photobucket.com/albums/m290/gqmarques/marcus1.jpg

http://i107.photobucket.com/albums/m290/gqmarques/marcus.jpg

http://i107.photobucket.com/albums/m290/gqmarques/marcus2.jpg

 

[bigballsmagerki]

Well I can't look at your pics. But the way the horn works its when you connect the lines it just completes the circut. Test to see if when you run electricity through the 2 connectors of the steering wheel if a reading goes though when the horn button is pressed. If so then just change the electrical ends and connect it to your stock shit. Sounds easy to me but seeing as how im not quite sure exactly how your setup is.... when you touch the two wires comming from the car does the horn go off? You just have to get it so your stock wires connected to your wheel will complete the circut when the button is pushed. It doesn't matter the attachment for the wires either.

 

[GQMarques]

Aight here... i took pix of this ef'n project. I took pix one section at a time to better show what i'm up against EXACTLY... If anyone has an answer to this puzzle, fk'n Awesome! Cuz it's drivin' me crazy!

ok here's the NRGSTEERING WHEEL
QUICK RELEASE SHORT HUB with a male black wire screwed to the front of it and female black wire leading to the back.

this end screws onto the short hub yet has a RED and BLACK wire ... and are both female connections.:g:

This pic is the opposite side of the pix above with the horn button connected to the black wire on the right side. Again this side has RED and BLACK female connections BUT as you can see... the horn only has one male connector:ranting2:

and lastly the pix below is all the pieces and the order they go together... so PLEASE if anyone knows how this all pieces together I'd appreciate b4 I end up look'n like this guy ~~=\> :headsmash:

Thanks,

Marquesâ„¢