1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

radiator fan switch wiring

Discussion in 'ECU's, Electronics, and Tuning' started by t3t4si, Dec 9, 2004.

  1. t3t4si

    t3t4si Member

    Messages:
    81
    Likes Received:
    0
    Joined:
    May 28, 2003
    He guys I recently installed a mugen low temp fan switch and thermostat on my b16. Well it turns out i cant get my fan to come on. I did install it properlly and in the proper location. I was just curious if you guys know a way to where i can just make a switch (mounted inside the car) myself and make it come on when ever i want. I have seen alot of people do this and was wanting to know how to.
     
  2. vtecsir1

    vtecsir1 Senior Member

    Messages:
    3,313
    Likes Received:
    17
    Joined:
    Dec 5, 2002
    Location:
    Orlando, FL
    you could have a bad relay. if you look at the radiator there is a small plug going to the radiator fan, splice the power wire and then run it into your car with a switch. this is a very easy thing to do just make sure you have a fuse inline.
     
  3. t3t4si

    t3t4si Member

    Messages:
    81
    Likes Received:
    0
    Joined:
    May 28, 2003
    Yea thanks I didnt relize how simply that was to do. I installed a switch in around 2 hours and ran the switch right next to my power mirror controls. :)
     
Verification:
Draft saved Draft deleted

Share This Page