1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

radius arm bushings or the spherical bearings for racing?

Discussion in 'Wheels / Suspension / Tires / Brakes' started by teamrrtjoker, May 5, 2010.

  1. teamrrtjoker

    teamrrtjoker riceburnin' dirt tracker

    Messages:
    90
    Likes Received:
    1
    Joined:
    Feb 17, 2010
    Location:
    Bend, Or
    So on the new dirt track car I got a little more wheel spin than I was hoping for and was wondering if anyone had any feedback or experience with spherical radius arm bushing/bearings compared to the regular rubber or poly bushings? I think it might help a little to do something up there to help with the breaking free on the dirt. Traction bar set-up is not out of the question either, but would require me to cut and re-fab my front bumper mounts to accomadate that type of bolt in system...thanks in advance
     
  2. TurboMirage

    TurboMirage YEEAAAHHH VIP

    Messages:
    24,582
    Likes Received:
    697
    Joined:
    May 20, 2003
    Location:
    Central, MA
    i have full spherical on the evo race car... very stiff.
     
  3. teamrrtjoker

    teamrrtjoker riceburnin' dirt tracker

    Messages:
    90
    Likes Received:
    1
    Joined:
    Feb 17, 2010
    Location:
    Bend, Or
    did they help with wheel hop or help with traction? I could probably live with stiff if it added traction. thanks for the input
     
Verification:
Draft saved Draft deleted

Share This Page