1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rear Disc Brake Conversion For My 88hf Crx

Discussion in 'Wheels / Suspension / Tires / Brakes' started by Gambler812, Mar 31, 2003.

  1. Gambler812

    Gambler812 Junior Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Mar 31, 2003
    I want to do a rear disc conversion on my 1988 CRX HF. I know that you can get the rear conversion from a 90-93 integra at a junk yard. But im not sure on the items I need to do so. So does anyone have a list of items that I need to buy. Thanks :D
     
  2. sportlinecrx

    sportlinecrx Banned

    Messages:
    6,020
    Likes Received:
    0
    Joined:
    Sep 28, 2002
  3. Civic_88ls

    Civic_88ls Senior Member

    Messages:
    267
    Likes Received:
    0
    Joined:
    Mar 6, 2003
    Location:
    everett, wasington
    Just to let u know., the integra trailing arms are about an inch or so longer than the crx ones. what u would have to do is take the spindles off the trailing arms and put the spindles on ur existing trailing arms, that have the drums. The disc spindles would take place of the drum spindles. i ran into that problem on my car. I got integra trailing arms and it was a bitch to put on and when i finally got the trailing arms bolted on, the camber was soo bad that there was a huge drop in tread wear on the inside of my tires. like 1/2 inch.
     
Verification:
Draft saved Draft deleted

Share This Page