1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

rpm/ecu issue suggestions?

Discussion in 'ECU's, Electronics, and Tuning' started by goldrims, Oct 27, 2009.

  1. goldrims

    goldrims New Member

    Messages:
    49
    Likes Received:
    0
    Joined:
    Dec 3, 2007
    so i swapped a 2000 non vtec obd2 engine in my 94 non vtec obd1 integra, droped engine in with stock harness and everything using a p28 chipped ecu.. problem is everything works besides rpm guage, only thing i can think of is that i swaped the guage cluster from the stock one to a gsr one few weeks back, ill be swaping it back in 2maro, but just incase that doesnt work, anyone with any ideas, cause i puzzled, i have done this before in a 95 civic with a 99 obd2 engine, no issues, let me know what you guys thinks...
     
    Last edited: Oct 27, 2009
  2. goldrims

    goldrims New Member

    Messages:
    49
    Likes Received:
    0
    Joined:
    Dec 3, 2007
    well i swapped the guages, its still doesnt work so i guess switching the dizzy and wires over to obd1 is the next best, anyone can confirm this, as i said did this same swap in a 95 civic none of these issues.. thanks
     
Verification:
Draft saved Draft deleted

Share This Page