S2000>EG front end conversion

We may earn a small commission from affiliate links and paid advertisements. Terms

jimboburgess

Go fast, Go Cheap
Does any one know the demensions, whether or not it would work.
What is required would it just be a matter of gettign the part and making the fit by fabbing up brackets and then wiring the headlights
. . .or would it not work at all since something(like the hood being off by a half a foot) is way off of the other one so it isn't worth thinking about.
 
Originally posted by jimboburgess@Aug 20 2005, 03:52 PM
Does any one know the demensions, whether or not it would work.
What is required would it just be a matter of gettign the part and making the fit by fabbing up brackets and then wiring the headlights
. . .or would it not work at all since something(like the hood being off by a half a foot) is way off of the other one so it isn't worth thinking about.
[post=542883]Quoted post[/post]​


People who swap front ends are lame.. Sheesh...
 
I like the headlight styling.
I was looking at it and it looks like it wouldn't work without major custom fabrication, or a big wallet. Cost to joy ratio isn't good enough.
 
Originally posted by phyregod+Aug 20 2005, 06:19 PM-->
jimboburgess
@Aug 20 2005, 03:52 PM
Does any one know the demensions, whether or not it would work.
What is required would it just be a matter of gettign the part and making the fit by fabbing up brackets and then wiring the headlights
. . .or would it not work at all since something(like the hood being off by a half a foot) is way off of the other one so it isn't worth thinking about.
[post=542883]Quoted post[/post]​


People who swap front ends are lame.. Sheesh...
[post=542908]Quoted post[/post]​

Coming from the man that has a 98 civic front end on a crx. :lol:
 
Originally posted by phyregod+Aug 20 2005, 05:19 PM-->
jimboburgess
@Aug 20 2005, 03:52 PM
Does any one know the demensions, whether or not it would work.
What is required would it just be a matter of gettign the part and making the fit by fabbing up brackets and then wiring the headlights
. . .or would it not work at all since something(like the hood being off by a half a foot) is way off of the other one so it isn't worth thinking about.
[post=542883]Quoted post[/post]​


People who swap front ends are lame.. Sheesh...
[post=542908]Quoted post[/post]​


watchu talkin bout willis??

http://www.miragepage.chrisswebdesign.net/.../miragefull.JPG
 
Originally posted by TurboMirage+Aug 22 2005, 12:10 PM-->
Originally posted by phyregod@Aug 20 2005, 05:19 PM
jimboburgess
@Aug 20 2005, 03:52 PM
Does any one know the demensions, whether or not it would work.
What is required would it just be a matter of gettign the part and making the fit by fabbing up brackets and then wiring the headlights
. . .or would it not work at all since something(like the hood being off by a half a foot) is way off of the other one so it isn't worth thinking about.
[post=542883]Quoted post[/post]​


People who swap front ends are lame.. Sheesh...
[post=542908]Quoted post[/post]​


watchu talkin bout willis??

http://www.miragepage.chrisswebdesign.net/.../miragefull.JPG
[post=543606]Quoted post[/post]​


And that, kids, is what we like to call a "ghetto beater".

lol j/k
 
Back
Top