1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Sohc To Dohc ! Help!

Discussion in 'HYBRID -> EG-EK / DC' started by Lowered_Expectations, Apr 27, 2003.

  1. Lowered_Expectations

    Lowered_Expectations Junior Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Apr 13, 2003
    Location:
    Ontario, Canada
    i was planning to put a LS non vtec from and integra in my 91 hatchback Si.

    i was just wondering if anyone has done this swap or who knows how much money, time and work is involved in it.

    what major parts are needed if any?, do i need a different comp?, and do i need a motor mount kit?


    any info or tips would be greatly appreciated!

    Thanxs
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    get a full B18A1 swap (pre 92)
    you will need a mount kit
    but other than that the swap should come with everything you need and will be the same OBD so you wont have to change plugs (might have to lengthen a few wires)

    you will need:
    engine/tranny (with all manifolds, alternator, etc..)
    mount kit (hasport is the best)
    ECU stock one will work as long as its OBD-0 (pre 92)
    axles

    i think that covers it .... someone else will ba able to give you a little more exact info (im not 100% sure on 4th gens)
     
  3. SleEPeR_CRX

    SleEPeR_CRX Senior Member

    Messages:
    1,226
    Likes Received:
    0
    Joined:
    Dec 22, 2002
    Location:
    Vancouver B.C. canada
    you also ned shift linkage.
     
  4. SleEPeR_CRX

    SleEPeR_CRX Senior Member

    Messages:
    1,226
    Likes Received:
    0
    Joined:
    Dec 22, 2002
    Location:
    Vancouver B.C. canada
    oo almost forgot, get a new clutch cable and speedo cable. it will make ur life alot easier.
     
Verification:
Draft saved Draft deleted

Share This Page