1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

someone help me find compression

Discussion in 'Engine Building' started by daa90crx, Jan 26, 2005.

  1. daa90crx

    daa90crx Junior Member

    Messages:
    11
    Likes Received:
    0
    Joined:
    Jan 26, 2005
    hey wasup people i was just wondering if anybody knew or could find out for me what the compression of a b16a with jdm itr pistons and maybe the lowest mill possible to the head would be now i know ctr pistons give higher compression but i hear the jdm itr pistons give higher compression than the usdm itr pistons right? well what im trying to get to is near 11.1 compression with stock honda parts but i hear ctr might go over with the milling of the head, neways can somebody help me out with that
     
  2. formby

    formby learning in progress

    Messages:
    5,735
    Likes Received:
    23
    Joined:
    Feb 19, 2003
  3. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    itr pistons are smaller cc than b16 pistons. you will drop.
    ctr pistons are slightly larger, and will put you at about 11:!, but they won't fit your b16a rods, and the b16b rods are the wrong length, so you'll need aftermarket rods too.
     
Verification:
Draft saved Draft deleted

Share This Page