1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

steering rack compatability??????

Discussion in 'Civic and CRX - EF' started by 89y49rexsi, Oct 6, 2009.

should i do it or not that is the question??????

Poll closed Oct 15, 2009.
  1. go for it its totally the same

    100.0%
  2. they are completely different dont waste your time

    0 vote(s)
    0.0%
  3. i have no idea man try it if it works cool if not oh well

    0 vote(s)
    0.0%
  1. 89y49rexsi

    89y49rexsi New Member

    Messages:
    114
    Likes Received:
    0
    Joined:
    Aug 6, 2009
    Location:
    utah
    ok the rack and pinion are going out on my sedan and need to be replaced i have my 89 crx si that has a good rack and pinion and brand new tie rods on it and im going to swap it on but i want to know if they are compatible first the part numbers came up the same at the local parts store and as far as i can tell there is no difference so if anyone knows let me know thanks guys =)????
     
  2. D15Beater

    D15Beater HNFTuning

    Messages:
    551
    Likes Received:
    8
    Joined:
    Jun 8, 2007
    Location:
    Concord N.C.
    Same part numbers for both cars..

    Honda Automotive Parts

    Honda Automotive Parts

    ...the only thing I could see being a possibilty is the HF having a different steering ratio than the Dx or Si but I dont know, to be honest.
     
  3. crxhfz6

    crxhfz6 Member

    Messages:
    130
    Likes Received:
    0
    Joined:
    Oct 6, 2009
    Location:
    Manhattan, KS
    the hf has a quicker steering ratio that the other two but they are all interchangable
     
  4. 89y49rexsi

    89y49rexsi New Member

    Messages:
    114
    Likes Received:
    0
    Joined:
    Aug 6, 2009
    Location:
    utah
    thats good cuz my 89 civic sedan is a dx and my crx is an si =) this makes me really happy im going to swap the steering racks when i swap the motor for my b16 which will make it much easier im swapping in my b16a thats got cams edelbrock intake mani and throttle body, act light weight fly wheel, act stage 2 clutch, aem intake, dc sports header, no name afpr, hasport mounts, b&m shifter, s1 lsd cable trans =) its going to be alot of fun =)
     
Verification:
Draft saved Draft deleted

Share This Page