1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Stock LS -> Turbo LS

Discussion in 'Engine Building' started by Dow.Tom, Oct 7, 2006.

  1. Dow.Tom

    Dow.Tom New Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Sep 16, 2006
    Okay I'm getting ready to buy a car with 70k mile Ls swap. My plans are in the later years is to put a turbo in. However, I'm wishing to run higher PSI with a T3/T4 (is this a good choice or no? I'm looking for around 300/50 hp and good torque) My main question is what components of the engine should I upgrade to handle this PSI.

    So far I am looking into
    Arias Pistons
    Eagle Rods

    That's all that I know of. I know I need more, what else should i look into?
     
  2. MikeBergy

    MikeBergy Blah blah blah....

    Messages:
    3,646
    Likes Received:
    1
    Joined:
    Oct 9, 2003
    Location:
    Central Coast, CALI
    You should really look into buying a book called Maximum Boost if you want to truly understand how turbocharging works, and how to properly size your turbo and other components. A short answer to your question - a good set of forged pistons, forged rods or at least getting ARP rod bolts for your stock LS rods, properly sizing the turbo system, and tuning your ecu will get you to 300whp reliably.
     
Verification:
Draft saved Draft deleted

Share This Page