1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

stupid/simple clutch question

Discussion in 'General Tech and Maintenance' started by 92CHB, Dec 2, 2005.

  1. 92CHB

    92CHB Senior Member

    Messages:
    707
    Likes Received:
    0
    Joined:
    Mar 23, 2004
    Location:
    Easthampton, MA
    Which way does does the clutch mount? Does the extended spline part face in towards the motor or away? Thanks
     
  2. B16RacerN2NR

    B16RacerN2NR Working Hard VIP

    Messages:
    6,148
    Likes Received:
    99
    Joined:
    Feb 28, 2003
    Location:
    Moving back West...
    it should say something along the lines of "flywheel side" on the disc itself.
     
  3. kaoskustoms

    kaoskustoms Senior Member

    Messages:
    550
    Likes Received:
    0
    Joined:
    Jan 6, 2003
    Location:
    casper wyoming man
    ext away or towards tranny



    it should only fit one way.
     
  4. 92CHB

    92CHB Senior Member

    Messages:
    707
    Likes Received:
    0
    Joined:
    Mar 23, 2004
    Location:
    Easthampton, MA
    Thanks guys. I think i can stop feeeling dumb now [​IMG]
     
  5. MXDesa

    MXDesa Senior Member

    Messages:
    927
    Likes Received:
    2
    Joined:
    Apr 19, 2003
    Location:
    Queens, New York
    There is an extremely easy way to tell which side is which. Honda clutch disks (and aftermarket ones) were only made to mount one way so you cant mess it up. Good Luck on the Repair, and dont worry bout it...
     
  6. 92CHB

    92CHB Senior Member

    Messages:
    707
    Likes Received:
    0
    Joined:
    Mar 23, 2004
    Location:
    Easthampton, MA
    Yes it only seems to fit one way but the extended part is facing toward the motor not towards the tranny like kaoskustoms said. So now i am very confused. I need to get this done ASAP 3" of snow in the forceast for tomorrow [​IMG] The clutch is for a Z6 which i am mounting to a act prolight flywheel on a DOHC ZC motor with a ex tranny, so everything should work together fine. HELP!

    [​IMG]
    This is the only way it sits flush with the flywheel

    [​IMG]
    This is the other side of the clutch disk
     
  7. kaoskustoms

    kaoskustoms Senior Member

    Messages:
    550
    Likes Received:
    0
    Joined:
    Jan 6, 2003
    Location:
    casper wyoming man
    yea that first pic is correct and the press plate goes on the side that yo show in the second pic

    yea that first pic is correct and the press plate goes on the side that yo show in the second pic
     
Verification:
Draft saved Draft deleted

Share This Page