1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

swap computer issues

Discussion in 'ECU's, Electronics, and Tuning' started by 99sidude, Jun 25, 2006.

  1. 99sidude

    99sidude Moderator Moderator VIP

    Messages:
    3,707
    Likes Received:
    170
    Joined:
    May 1, 2006
    Location:
    Ohio
    I just finished my b18c swap in my eg hatch with no major issues. I have 2 questions...

    -What should I be idling at? I seem to be at 900-1000 rpm's for idle. this seems ok, but it used to idle around 600 with the d15, and my old em1 was around 500.

    -Where should I be hitting vtec? I havn't taken it to 5500 yet because I am breaking in a new clutch, but at 4500, the exhaust tone changes and gets alot louder (like in vtec). Im just wondering if thid is vtec hitting early, or my IAB's activating?
     
  2. VTECin5th

    VTECin5th Administrator

    Messages:
    2,182
    Likes Received:
    4
    Joined:
    Apr 17, 2005
    Location:
    Phoenix Az
    What ecu are you running?
     
  3. 99sidude

    99sidude Moderator Moderator VIP

    Messages:
    3,707
    Likes Received:
    170
    Joined:
    May 1, 2006
    Location:
    Ohio
    Sorry I should have specified.... P72
     
  4. VTECin5th

    VTECin5th Administrator

    Messages:
    2,182
    Likes Received:
    4
    Joined:
    Apr 17, 2005
    Location:
    Phoenix Az
    VTEC will turn on between 4400 and 4800 depending on throttle/tach.. normal.
     
Verification:
Draft saved Draft deleted

Share This Page