1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

swap questions B16 into eg

Discussion in 'HYBRID -> EG-EK / DC' started by sleepercivic, Jul 2, 2003.

  1. sleepercivic

    sleepercivic Senior Member

    Messages:
    227
    Likes Received:
    1
    Joined:
    Mar 14, 2003
    Location:
    NC Mountains
    Doing a swap, JDM b16a SirII into 94 ex coupe.
    My mechanic is in Florida and I am in North Carolina he says the starter on my B16 may be damaged
    my question is, Will my starter off of my D16z6 work on the B16, if needed or is it different?
    Also what are the valve clearence specs for an Obd1 Jdm B16a ?

    thanks in advance
     
  2. SixtySecondAssassin

    SixtySecondAssassin Senior Member

    Messages:
    1,071
    Likes Received:
    0
    Joined:
    Sep 30, 2002
    Location:
    Austin, TX
    i dont think the starters are interchangable. take them off and compare them. use the valve lash specs for a Del Sol vtec.
     
  3. sleepercivic

    sleepercivic Senior Member

    Messages:
    227
    Likes Received:
    1
    Joined:
    Mar 14, 2003
    Location:
    NC Mountains
    Yeah I know to use the Del SOl Dohc vtec specs but I don't have them, does anyone have them on hand
    sorry for the confusion first post.
    as for the starters I have not seen the engine yet I am not in the same state that I will be doing the swap in that is why
    I asked about the starters.

    thanks again
     
  4. SixtySecondAssassin

    SixtySecondAssassin Senior Member

    Messages:
    1,071
    Likes Received:
    0
    Joined:
    Sep 30, 2002
    Location:
    Austin, TX
    Intake: 0.006"-0.007"
    Exhaust: 0.007"-0.008"
     
  5. sleepercivic

    sleepercivic Senior Member

    Messages:
    227
    Likes Received:
    1
    Joined:
    Mar 14, 2003
    Location:
    NC Mountains
    Thanks, SixtySecondAssassin for the specs

    anybody else know about the starter?
    my mechanic/brother said, that the spade connector looks like it may have been pushed in, he is going to test it.
    if it is good, I 'm ok, if not can I use my D16z6 starter ?

    thanks again
     
Verification:
Draft saved Draft deleted

Share This Page