1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

swapping cams and valtrain

Discussion in 'HYBRID -> EG-EK / DC' started by marshall12395, Nov 17, 2012.

  1. marshall12395

    marshall12395 New Member

    Messages:
    36
    Likes Received:
    0
    Joined:
    Aug 29, 2012
    i wanna order cams and valvetrain but not sure what to get. my engine is type r so i was thinking about putting skunk 2 tuner series stage 2 cams with skunk 2 Tuner Series Valve Springs,Pro Series Valve Set not sure what i need Standard Compression or high compression and skunk 2 Titanium Retainer Set?? does anybody think this is going to be a good setup?? and i wanna get a throttle body but not sure what size??
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,034
    Likes Received:
    3,963
    Joined:
    Sep 28, 2002
    Location:
    CT
    if you are going to put a more aggressive cam in there, you should really also look in to putting a higher compression piston in there to get the most out of the cams
     
  3. marshall12395

    marshall12395 New Member

    Messages:
    36
    Likes Received:
    0
    Joined:
    Aug 29, 2012
    but with just tuner stage 2 my car should runs those???
     
  4. marshall12395

    marshall12395 New Member

    Messages:
    36
    Likes Received:
    0
    Joined:
    Aug 29, 2012
    what kinda pistons should i put???
     
Verification:
Draft saved Draft deleted

Share This Page