1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

teg calipers and rotors on stock cx hubs?

Discussion in 'Wheels / Suspension / Tires / Brakes' started by vtecsir1, Mar 11, 2004.

  1. vtecsir1

    vtecsir1 Senior Member

    Messages:
    3,313
    Likes Received:
    17
    Joined:
    Dec 5, 2002
    Location:
    Orlando, FL
    i searched for this and didnt see the exact question or answer im looking for.
    teg calipers and rotors on stock cx hubs? i have a 95 cx and was wondering if i can just take the calipers and rotors off and put integra calipers and rotors on. will i need an extra bracket or something or can it not be done at all.
     
  2. katman

    katman Member

    Messages:
    81
    Likes Received:
    0
    Joined:
    Mar 11, 2004
    Location:
    PASADENA, CALIFORNIA

    NO. this will not work at all.
    You'll run into fitment issues as in the integra caliper will not fit onto the CX knuck/hub assembly --- the offset is off by a few cm's.

    If you want to use integra brakes, you need the whole integra knuckle & hub assembly or the knuckle/hub assembly off of a 92-95 civic coupe with ABS (exactly the same as Integra knuckle/hub assembly).
     
  3. vtecsir1

    vtecsir1 Senior Member

    Messages:
    3,313
    Likes Received:
    17
    Joined:
    Dec 5, 2002
    Location:
    Orlando, FL
    thanks man, welcome to the site too.
     
  4. katman

    katman Member

    Messages:
    81
    Likes Received:
    0
    Joined:
    Mar 11, 2004
    Location:
    PASADENA, CALIFORNIA

    n/p & thanks :spin:
     
Verification:
Draft saved Draft deleted

Share This Page