1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

This is it

Discussion in 'ECU's, Electronics, and Tuning' started by JeDi PiMP, Sep 6, 2003.

  1. JeDi PiMP

    JeDi PiMP Junior Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Jul 31, 2003
    Location:
    Ewa Beach Hawaii
    Jus got the 94-95 obd1 p72 for my 99' gsr motor in my 99 civic... :huh:

    but anyways i also got the Obd2-obd1 conversion harness

    my question is ...that should be it right??
     
  2. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    no.

    you need an obd2b -> obd1 conversion harness.
     
  3. MaliWho97

    MaliWho97 Senior Member

    Messages:
    568
    Likes Received:
    0
    Joined:
    Jan 16, 2003
    That should be it!!! Just clip the adapter harness into place, then plug in your ecu, the OBD1 doesn't bolt to the kick panel quite like the OBD2, but it will fit!!!!!! Good luck!!!!!!!!
     
  4. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    like i said above, no it won't. there are two variants of obd2. the plugs simply won't plug into place, and there are wiring differences on top of it.

    verify that the harness is obd2b -> 1 and not obd2a->1
     
Verification:
Draft saved Draft deleted

Share This Page