1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Thoughts/Opinions on this LS-Vtec turbo set up

Discussion in 'Engine Building' started by Sir90civichatch, Sep 20, 2010.

  1. Sir90civichatch

    Sir90civichatch Junior Member

    Messages:
    20
    Likes Received:
    1
    Joined:
    Sep 24, 2003
    Location:
    West Chester, PA
    LS B18 block
    ------------------
    All Internals Balanced:
    Eagle Forged Crank 4340
    Stroke: 3.5040
    Eagle Rods 4340 H-Beam (Length 5.394 in.)
    SRP Pistons 9.2:1
    Bore size: 81.50 Oversize: 0.50
    Dome Vol: -3.9
    -----------------------
    B16 Head -Port Matched - Polished - 5 angle Valve job
    Super techs: Dual Valve springs, Titanium retainers, Black Nitride coated Valves
    Blox Comp Turbo Cams
    Skunk 2 intake Manifold
    65mm JG throttle body
    Drag turbo Kit
     
    1 person likes this.
  2. Sir90civichatch

    Sir90civichatch Junior Member

    Messages:
    20
    Likes Received:
    1
    Joined:
    Sep 24, 2003
    Location:
    West Chester, PA
    So no one has any thoughts on the above set up?
    Additional items you might add, Injectors, engine management?

    Thanks for everyone's input, much appreciated.
     
  3. boostedls

    boostedls hmmm.. i like pie

    Messages:
    27
    Likes Received:
    0
    Joined:
    Sep 9, 2010
    Location:
    Elkhart
    dsm 550cc injector ?
    Good tune!
     
Verification:
Draft saved Draft deleted

Share This Page