1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Throttle body vscuum

Discussion in 'HYBRID -> EG-EK / DC' started by honda801, Dec 26, 2011.

  1. honda801

    honda801 New Member

    Messages:
    152
    Likes Received:
    1
    Joined:
    Jun 19, 2007
    Location:
    SLC
    There are two air barbs on iacv and thritte body csn someone exp ok ain to me what goed to the and where they gi, oh yeah its a 2000 b16
     
  2. josh_crewdson@y

    josh_crewdson@y New Member

    Messages:
    438
    Likes Received:
    4
    Joined:
    Dec 5, 2007
    Location:
    nova
    They are for coolant lines.
    Line runs from the nipple on the flange of the intake manifold to the throttle body, from the throttle body to the iacv, from the iacv to the nipple on the water pipe on the back of the block. In that order. Easiest hose to find is 5/16 fuel hose or heater hose.
     
  3. honda801

    honda801 New Member

    Messages:
    152
    Likes Received:
    1
    Joined:
    Jun 19, 2007
    Location:
    SLC
    ok so i hooled a timing light up to it and i had the most sparatic blink ever it was slow and skipping every five or so times, i wish i could upload it for you i will keep trying but what would cause a sparatic spark
     
  4. josh_crewdson@y

    josh_crewdson@y New Member

    Messages:
    438
    Likes Received:
    4
    Joined:
    Dec 5, 2007
    Location:
    nova
    Is your cap and rotor good? CEL's?
     
Verification:
Draft saved Draft deleted

Share This Page