1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Transmission rebuilding

Discussion in 'General Tech and Maintenance' started by JesseA, Mar 3, 2009.

  1. JesseA

    JesseA New Member

    Likes Received:
    Mar 1, 2009
    I need a little help, so i am building a boosted b16a2 with hopes of pushing 550whp,,, boost will probably be around20-25psi on my t3 s366... I plan on track racing, but also it will see the odd drag race and i will also be driving it on the street,, what are my options for transmission, i've already ordered a quaife LSD,, what should i do about gears, all i could find was kits by MFactory, are the good? and what ratios would work best with my goals?

    I have no idea about transmissions and dont have the time to learn as the motor is almost complete. any advice help would be appreciated, also there is no budget, i got the car for free and budgeted 20k on complete build and have barely eaten through half of that. with only drivetrain and paint to finish.
  2. 97hatch

    97hatch ?

    Likes Received:
    Feb 6, 2003
    Anderson IN
    where you located yes mfactory stuff is good if your not to far ill build your trans for you
Draft saved Draft deleted

Share This Page