1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

type r swap help

Discussion in 'HYBRID -> EG-EK / DC' started by civicr1, Jul 13, 2003.

  1. civicr1

    civicr1 Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Feb 10, 2003
    ok i have a 93 vx hb i put in a 97 jdm typer motor with a si chipped ecu it runs but when could idle goes up and down from 800rpm to 1400rpm but when it gets up to operating temp it stops doing that any one have any ideas what it could be and another question the 93 vx has vtec but would i still need to wire it just wondering if the vx vtec go to different pins on the the vx ecu then the si

    thanks for your help
    mike
     
  2. vtecsir1

    vtecsir1 Senior Member

    Messages:
    3,313
    Likes Received:
    17
    Joined:
    Dec 5, 2002
    Location:
    Orlando, FL
    97 is obd 2 , did you change it to obd 1? or did you wire it to work?
     
  3. civicr1

    civicr1 Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Feb 10, 2003
    i just plug all the sensors in and bought a obd1 vtec distributor
    and a si ecu chipped for itr
     
Verification:
Draft saved Draft deleted

Share This Page