1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Type R tranny

Discussion in 'HYBRID -> EG-EK / DC' started by sOLLEx, Nov 3, 2003.

  1. sOLLEx

    sOLLEx Junior Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Oct 20, 2003
    I need to know if there are any differences other than the gear ratios in the USDM and JDM type r trannys. The one I have i have is stamped LSD and the serial number includes the S80 code. I don't know if it is from a civic type r or integra type r. I basically need to know which tranny it is and if there are any differences that i need to be aware of to bolt onto the b20b engine i'm swapping. I already had to order the slave cylinder, clutch pipe, clutch release fork w/boot and spring.
    thx
     
  2. HatchSpeeD

    HatchSpeeD ...Hi...

    Messages:
    1,241
    Likes Received:
    0
    Joined:
    Apr 14, 2003
    Location:
    Beantown
  3. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    other than gearing and the presensce of a limited slip, there is no difference in hooking it up to a b-series block.
     
  4. JDMilan

    JDMilan Senior Member

    Messages:
    6,730
    Likes Received:
    0
    Joined:
    May 11, 2003
    Location:
    Boca Raton, FL
    if you can go with the Jspec one since it has a better final drive.
     
Verification:
Draft saved Draft deleted

Share This Page