1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Uberdata Question?

Discussion in 'ECU's, Electronics, and Tuning' started by Domi31, May 12, 2006.

  1. Domi31

    Domi31 Member

    Messages:
    340
    Likes Received:
    1
    Joined:
    Mar 21, 2005
    Location:
    Nor Cal
    Ok I plan on going turbo next summer.

    I want to know what I need for uberdata.
    I have a OBD1 ECU from phearable.net (with a ITR base map, with the 4pin port ready)

    when I get tuned do i need a new blank chip or can it be written over?

    This means I just need the:
    -software (looking at uberdata)
    -a datalogging cable that plugs to labtop
    -a labtop to tune
    -windband

    Is there something Im missing?
     
  2. preludebuddy

    preludebuddy Senior Member

    Messages:
    372
    Likes Received:
    0
    Joined:
    Mar 10, 2004
    Location:
    putting the rad in colorado
    look into crome...much better. just use freelog for datalogging. the chip should be able to be re-burned but that means you'll need a chip burner or an ostrich from moates.net
    its nice to have more than one chip though...just in case something happens.
     
Verification:
Draft saved Draft deleted

Share This Page