1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Vacuum connections on h22

Discussion in 'General Tech and Maintenance' started by H22AdelSol, Jun 16, 2004.

  1. H22AdelSol

    H22AdelSol Senior Member

    Messages:
    505
    Likes Received:
    0
    Joined:
    Oct 26, 2003
    Location:
    san diego, california
    http://www.hondaswap.com/gallery/viewimage...4b04d2bde06.jpg

    OK, first off i have a jdm h22.

    On the right side of the IM there is 2 nipples, 1 on top and 1 on bottom in the above picture. There is also 1 on back near the same place with a #12 by it.

    On mine there is 2 on the back and one on the side. Im not sure if they just put the one on top that was on the side, on the back of the IM. Anyone know whats up?

    I know on mine the bottom one is for iab because obviously they work when i blip the throttle at high rpm. I think the top one is still for cruise control but im not sure.

    thanks
     
  2. sleepn_accord

    sleepn_accord Senior Member

    Messages:
    235
    Likes Received:
    0
    Joined:
    Jul 25, 2003
    correct. all the nipples on the back half of the manifold pretty act the same ...
     
Verification:
Draft saved Draft deleted

Share This Page