1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

vtec head on d15 96 cx motor? possible?

Discussion in 'HYBRID -> EG-EK / DC' started by england335, Dec 2, 2003.

  1. england335

    england335 Junior Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Nov 19, 2003
    i know that you can put the ex head from an ek ex onto the stock d 1.5 motor in my 96 cx . i know its nothing to kick you back in your seat. but i know it will give a little punch and help me to be more patient till i can afford a swap. will the motor blow, i've heard from some it wont and some say it will in no more than 100 miles. anybody know how this figures out? thanks
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,020
    Likes Received:
    3,951
    Joined:
    Sep 28, 2002
    Location:
    CT
    some people know what they are talking about ..... some people talk out of their ass


    i had a mini me for about 6 months before i did my swap
    i had no problems what so ever ... and i was using a D15B7 block with 265,000 miles on it :lmao:
     
  3. EJdmB18C

    EJdmB18C Member

    Messages:
    57
    Likes Received:
    0
    Joined:
    Dec 1, 2003
    Location:
    Sacramento
    I dont know if you can...but if you do...you gotta change the your Cx intake manifold to an EX one aslo....the throttle body will be face sideways now...instead of up....since your motor is a d15....try using a 94-95 EX head on it.....maybe that'll work...i had a Mini Me myself :roll: good luck anyways..
     
Verification:
Draft saved Draft deleted

Share This Page