1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

vtec wiring please help!

Discussion in 'HYBRID -> EG-EK / DC' started by MarkN929RR, Feb 24, 2004.

  1. MarkN929RR

    MarkN929RR Member

    Messages:
    48
    Likes Received:
    0
    Joined:
    Feb 24, 2004
    ok I came up with my own little solution. Should I just hard wire my cx ecu ont my d16y8? its a 92 hatch and I need to know how to do it. Please help me out.
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    ummmm no .... just get a P28
     
  3. MarkN929RR

    MarkN929RR Member

    Messages:
    48
    Likes Received:
    0
    Joined:
    Feb 24, 2004
    well then does that mean I have to go get a 92 SI/EX distib.?
     
  4. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    no

    heres all you have to do
    you have a 92 and 92s are prewired for VTEC up to the shock towers

    either get a 92-95 EX/Si engine harness.... swap the plugs for the distributor, alternator, and injectors with the OBD-2 plugs (get em from a junkyard if you dont have the OBD-2 harness)

    or swap the plugs on your CX harness and add the VTEC wires and rewire it to run a 4 wire O2 sensor

    or swap all the OBD-2 parts out for OBD-1 parts and rewire your engine harness to run a 4 wire O2 sensor

    the P28 will plug right into your car
     
Verification:
Draft saved Draft deleted

Share This Page