1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

What bracket do I need??

Discussion in 'HYBRID -> EG-EK / DC' started by kbellamy, Mar 15, 2005.

  1. kbellamy

    kbellamy Junior Member

    Messages:
    15
    Likes Received:
    0
    Joined:
    Mar 6, 2005
    Hey, I have a 94 civic EX and a 95 GSR engine to put into it. Anyhow, I know I need to get a bracket for the engine. I was wondering if you guys could be very specific about what bracket that is, and what it looks like. Need to know as soon as possible, thanks alot guys.

    Kbellamy
     
  2. intense1_4u

    intense1_4u Junior Member

    Messages:
    10
    Likes Received:
    0
    Joined:
    Feb 12, 2005
    Go get yourself a hasport kit and do it right, you need more than just a bracket to do that one..
    Look here fore the right stuff..
    Good luck with your project.
    http://www.hasport.com/Products/Mount%20Kits/EGSTK.htm
     
  3. intense1_4u

    intense1_4u Junior Member

    Messages:
    10
    Likes Received:
    0
    Joined:
    Feb 12, 2005
  4. 92civicb18b1

    92civicb18b1 The Trisexual

    Messages:
    8,859
    Likes Received:
    18
    Joined:
    Oct 1, 2003
    Location:
    The asshole of the USA, New Jersey
    Get all 5 Teg mounts to be safe.

    You only need the rear "L" bracket, upper driverside mount, lower driver side bracket and the trans bracket.

    If you get the hasport kit you don't need eother of the front brackets.
     
Verification:
Draft saved Draft deleted

Share This Page