whats your 1/4 mile times???

We may earn a small commission from affiliate links and paid advertisements. Terms

in the sig,


13.3@103 with slicks, SiR2 motor in Gutted EG.
 
in the sig... watch the vid. no launch at all. i just put it in first and went with it. i know with slicks and given my trap speed i can nail a 14.5 no sweat. all head work. stock 1g b16 shortblock.
 
in the sig....

i put my a/c bracket/mount on tonight, and have a set of a friend of mine's stockies on front with almost no air in them, along with a totally stripped interior, ready for the track tomorrow morning...hopefully i'll do a lot better than my previous times.
 
Well, I finally got to the track! But I only got in 2 runs. But it was fun anyway :)
Chris (AKA DOHC_Accord) should find this interesting.

3/20/04 Woodburn, OR dragstrip.
R/T= .425
60’ = 2.381
330 = 6.391
1/8 = 9.674 @ 75.58MPH
1000' = 12.58
1/4 = 14.871 @ 94.45MPH

1995 Honda Accord EX Sedan with JDM H22A (open diff, NA, mild bolt on mods.)
More details of the run can be seen by clicking here.

Bruce
 
5g hatch with b18c1 and LS garbage BS tranny and 17's 'n' falkens...

14.7@97mph... <_<
i got screwed on the tranny :(

.. but ill post here again in 2-3 months hehe.. (turbo :worthy: )..
 
well i have a 91 4 door that i just ran 12.6 at 110 at LACR Palmdale at IDRC this past weekend running a b16a with a t3t4 turbo with hondata.
 
Originally posted by mjfubar@Mar 31 2004, 10:23 PM
well i have a 91 4 door that i just ran 12.6 at 110 at LACR Palmdale at IDRC this past weekend running a b16a with a t3t4 turbo with hondata.

how much boost holmes?
 
Originally posted by HellBentHONDA+Apr 1 2004, 01:29 AM-->
@Mar 31 2004, 10:23 PM
well i have a 91 4 door that i just ran 12.6 at 110 at LACR Palmdale at IDRC this past weekend running a b16a with a t3t4 turbo with hondata.

how much boost holmes?

wait a second....noooo I'm confused!!!! The quote says: mjfubar Posted: Mar 31 2004, 10:23 PM

the original thread says....

mjfubar Posted: Apr 1 2004, 01:23 AM

head...hurting...
 
Originally posted by revolution8k+Mar 31 2004, 10:41 PM-->
Originally posted by HellBentHONDA@Apr 1 2004, 01:29 AM
mjfubar
@Mar 31 2004, 10:23 PM
well i have a 91 4 door that i just ran 12.6 at 110 at LACR Palmdale at IDRC this past weekend running a b16a with a t3t4 turbo with hondata.

how much boost holmes?

wait a second....noooo I'm confused!!!! The quote says: mjfubar Posted: Mar 31 2004, 10:23 PM

the original thread says....

mjfubar Posted: Apr 1 2004, 01:23 AM

head...hurting...

different time zones. my time zone is pacific and so is his but you're east coast so you're ahead 3 hours and must see it differently. what i saw was "Posted on Mar 31 2004, 10:23 PM". never saw an 'april'.

EDIT: see now im quoting you and its says your time from your post "QUOTE (HellBentHONDA @ Apr 1 2004, 01:29 AM)" above ^^
 
15.6 @ 89 mph B16 w/ I/E - I thought was a pretty good run for an almost stock Si.

15.1 @ 98 mph B16 Turbo - wasn't paying attention to the light and took off normal as if I were taking off at a stop light (btw, I'm teh suck at launching). Spun tires all the way through 2nd gear all the way to redline with falken azenis. :woo:

better times next time out to the track.
 
14.048 with b18c1 with cold air with no filter, open jdm ITR header, polished stock gsr intake manifold, sir2 tranny, 195/55/14 azenis at 16psi and no passanger seats or spare.
 
refer to sig. terrible time, first time at track. itll be better when i get it back on the road again.
 
i'll let you know may 23th :p - i should be ready for the test and tune that night at island dragway-
 
Old 1990 Integra Sedan w/auto - 17.485 @ 76mph

New 1990 Integra Sedan - I dunno yet. 5 speed swap, ICEMAN, Stock clutch, S1 transmission and 14's y0.

Hopefully 15.5's. But who knows?
 
I have a 1995 Honda civic ex with abs. I ran with a full interior

RT .929
60FT 2.316
330FT 6.179
1/8 9.330
MPH 77.99
1/4 14.298
MPH 99.24

As you can read I fell asleep on the light also spun those small wheels.

Mods: 14in stock donuts wraped in azenis rubber(195-60)
CTR cams, ITR pistons, DC jdm style headers, 2 1/2in exhaust
Aem CAI, Port n polish head, b18c1 engine, stock ecu

What size of rims and tires do i need to reduce my 60ft time? Can get out of the hole quick enough
 
13.4 @ 105 in a '90 Crx with JDM B16a I/H/E and 75 dry shot missing third gear. Low 13 high 12's next time for sure!!!!
 
Back
Top