Which LCD would you buy ??

We may earn a small commission from affiliate links and paid advertisements. Terms

CRX-YEM

Super Moderator
Moderator
VIP
3G Technology GM-190B Black 19" 15ms LCD Monitor

Brightness: 350 cd/m2
Contrast Ratio: 600:1
Display Colours: 16.7 Million
Display Type: SXGA
Horizontal Fresh Rate: 31.47 - 80Khz
Maximum Resolution: 1280x1024
Panel: Active Matrix, TFT LCD
Pixel Pitch: 0.294mm
Recommended Resolution: 1280x1024
Viewing Angle: 170°(H) / 170°(V)

$329 w/ $100 rebate = $229


Fuji Plus FP-988D Silver-Black 19" 12ms LCD Monitor

Brightness: 250 cd/m2
Contrast Ratio: 600:1
Display Colours: 16.7 Million
Display Type: SXGA
Horizontal Fresh Rate: 30~80 KHz
Maximum Resolution: 1280x1024
Panel: TFT LCD
Pixel Pitch: 0.264mm
Recommended Resolution: 1280x1024
Viewing Angle: 160°(H) / 160°(V)

$299 w/ $50 rebate = $249


Is a diference in 100cd/m2 realy noticible.
Is a 3 ms differnce in responce time that noticable as well
only other major difference is the dot pitch .264 vs .294

Or would you purchase some other LCD for this price range.
mostly used for CAD/CAM, internet/bt , 1% chance or being used for games.

help me decide
 
The most noticeable thing is gonna be the pixel pitch. I don't remember if lower is better, but I'd get the better one based on the difference in pixel pitch.
 
Originally posted by CRX-YEM@Aug 3 2005, 05:02 PM
yeah the lower the pixel pitch the better.
[post=535406]Quoted post[/post]​


Not necessarily. The optimum pixel pitch is around .25mm Majority of the CAD CRT monitors like the Lacie Blue Electron are all .25mm

Dude, if your just doing internet stuff and normal computing, either one is fine....it basically comes down to what you think looks cooler, and whats cheaper.
 
:withstupid: :werd:
I ordered the Fuji.

and all of our CAD monitors here at work are .20mm pitch. and if you put a .25mm next to it you can really tell teh difference.
 
Back
Top