1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

wire harness fit

Discussion in 'Civic and CRX - EF' started by sevenhillsbilly, Feb 19, 2008.

  1. sevenhillsbilly

    sevenhillsbilly New Member

    Messages:
    613
    Likes Received:
    3
    Joined:
    Feb 18, 2008
    will a d15 wire harness fit up to a d16 motor and what chip would be the best one for the ecu ??
     
  2. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    What do you mean when you say chip? Are you thinking of chipping an ECU so you can tune it, or just soldering in a pre-tuned ECU chip?
     
  3. roninallout79

    roninallout79 Plan B

    Messages:
    151
    Likes Received:
    0
    Joined:
    Oct 19, 2007
    Location:
    GER friggin MANY
    the harness will work depending on what manifold you have. If its a DPFI the harness will not work but if its a MPFI the harness should plug right up as for a chip look around at your local tuner shops that have a good rep to see if they can get you a good deal on a REAL chip.

    Good Luck
    TRU
     
Verification:
Draft saved Draft deleted

Share This Page