1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wire Harness

Discussion in 'HYBRID -> EG-EK / DC' started by JDcompman, Sep 8, 2003.

  1. JDcompman

    JDcompman Junior Member

    Messages:
    19
    Likes Received:
    0
    Joined:
    Feb 24, 2003
    Just trying to figure out which wire harness I should use for my swap. I'm swapping a build b16a2 into a 94 civic dx. Should I use the stock d15 wire harness and just modify it or use the 99 si harness and a converted 0bd2 p28 ecu? Or any other good or easiest ideas? <_< Thanks guys! Jason
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    modify your harness

    just switch a few plugs over from the B16 harness and lengthen a few wires

    its pretty easy
     
  3. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.

    Take your time, and try to have the wiring diagrams from both harness's, as you are going OBD IIb to OBD I, you want to make sure you color coordinate right.
     
Verification:
Draft saved Draft deleted

Share This Page