1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Wiring Issues with an CRX HF to B18C1

Discussion in 'ECU's, Electronics, and Tuning' started by rustedwhite89, May 1, 2005.

  1. rustedwhite89

    rustedwhite89 Junior Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    May 1, 2005
    Okay, so I am new to the whole wiring thing. Dropping a engine, no problem, wiring is. My boy who usually helps and knows wiring is in the reserves and was sent to Iraq. So he is not going to be of any help. So here is my problem.

    I picked up a 89 CRX HF, my first CRX, and have a '95 JDM B18C1 (OBDI), the ECU is a P73(OBDII). I have the HF completly gutted. I will only use the HF at the track and I wanted to know if it is going to make a difference with the wiring.

    Meaning: is there really a need for me to convert everything or can I transplant an Integra's wiring into the CRX?
     
  2. boomslang

    boomslang New Member

    Messages:
    9
    Likes Received:
    0
    Joined:
    May 18, 2005
    You'll need to convert the HF wire harness.
     
Verification:
Draft saved Draft deleted

Share This Page