Discussion in 'Civic and del Sol - EG and EK' started by danielthemanual1, Mar 19, 2007.
Can you make a y8 manifold fit on a d16z6 head? if you can.... how?
theres no where to put the PCV valve and theirs a sensor on the back of my z6 intake but nowhere to put it on the y8.
the pvc valve just goes into the air intake
theres no where to put it on the y8 though
thanx for the pm. but the pics didnt show up and it still didnt tell me where the pcv valve would go. thanks though dude
the pvc goes to the air intake
do u know what a pcv valve is? mine goes into the very last intake runner right b4 it goes to the head. the y8 manifold has no place to put it. i cant just do away with it.
it will be the same thing if yours is not going into the air intake its in the wrong place, you are talking about the vent on top of the valve cover right ?? because thats the pvc valve
i simply have a hose that goes from the valve cover to the air intake but they call that a breather hose. im talking about the pcv valve that goes from my intake manifold to the last intake runner b4 it bolts to the head.
take a pic of it and put it up thre breather hose that you call it is the pvc valve so im not sure what your talking about, were else does ths hose go your talking about besides the intake main
what kinda moter do you have?
well thats kinda hard i have 5 cars and 3 of them has had 2 diffrent kinds of motors in them lol
any of them have a z6. i cant get the pics to get on the post.
ill post a pic hold on a second but no none of mine had that i went with the d15b,brb
dude, the hole on the intake just holds it in place. It doesnt actualy "enter" the intake at the runner. One end goes into the valve cover, the other to a "box" directly under the intake.
d16z6. well close enough lol
that is definitly NOT the pcv. Its the thicker one further to the right, on the mani.
actuly were both right just find a vaccum line to the y8 and t it into there and it will be fine. and my bad its pcv not pvc lol
Separate names with a comma.