1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

z6 with p28 ecu?

Discussion in 'HYBRID -> EG-EK / DC' started by Deviant117, Jan 26, 2011.

  1. Deviant117

    Deviant117 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Jan 26, 2011
    I know with a dsm you can use an ecu from a manual trans in a dsm with an automatic and vice versa. I'm doing a mini-me swap, d16y7 block with a z6 head. Wondering if I can use a P28 ecu for a manual trans in my automatic 99 civic dx.
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,964
    Joined:
    Sep 28, 2002
    Location:
    CT
    :no:

    they are not the same
     
  3. GhostRidaz

    GhostRidaz New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Jan 27, 2011
    Would the P28 ecu work inside of a 95 DX with the 1.5 manual trans?? Gonna do a head swap to make it V-Tech in a few months and I just want to know what exactly I'm gonna need to do so.
     
  4. K2e2vin

    K2e2vin Senior Member

    Messages:
    8,446
    Likes Received:
    92
    Joined:
    Jan 2, 2003
    Location:
    Raleigh, NC
    Yes. P28 is in 92-95 Si/EXs and should plug up. A automatic ECU will work in both manual and automatic, but a manual ECU will only work in manual transmission. This is due to the transmission lock-up solenoid being controlled by the ECU.

    96-00 have a slightly different ECU harness.

    It's VTEC. (V-Tech is a phone company).
     
Verification:
Draft saved Draft deleted

Share This Page