1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ZC SOHC ECU help!

Discussion in 'Civic and del Sol - EG and EK' started by ek4drcindy, Mar 24, 2011.

  1. ek4drcindy

    ek4drcindy New Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Mar 24, 2011
    what ecu do i use for zc sohc non vtec?

    d16y7 ecu didnt work out well.
     
  2. d-mon

    d-mon what r u compensating 4?

    Messages:
    125
    Likes Received:
    4
    Joined:
    Jul 1, 2008
    lol, in a 96-00 chassis?
    try an obd2/1 harness and a p06 ecu.
    use your y7 distributor.
     
  3. ek4drcindy

    ek4drcindy New Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Mar 24, 2011
    98 chassis p06 or pm6 I hope will work
     
  4. TurboRex90

    TurboRex90 Golden EG

    Messages:
    1,250
    Likes Received:
    31
    Joined:
    Jul 15, 2008
    Location:
    Maryland
    Im using a SOHC ZC block with a Z6 (vtec) head and i run a stock P28 ECU. But thats just me.
     
  5. ek4drcindy

    ek4drcindy New Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Mar 24, 2011
    I wanna try pm6 but I'm not sure it's gonna work; today I tried p2p ecu and it didn't start at all.
     
  6. juba allen

    juba allen New Member

    Messages:
    6
    Likes Received:
    0
    Joined:
    Feb 26, 2009
    i have a sohc zc, in my 96 dx HB. It's not running well. what ECU should i use. Thank You
     
  7. myciv

    myciv New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    May 20, 2011
    1/4 time


    i got the same setup in my 92 cx hatch, what you running in the 1/4 mile?
     
  8. porkfried83

    porkfried83 New Member

    Messages:
    93
    Likes Received:
    1
    Joined:
    Mar 11, 2011
    Location:
    ME
    I have a PO6, I don't need anymore.
     
Verification:
Draft saved Draft deleted

Share This Page