1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Zc Swap Nightmare!!!!!!!!

Discussion in 'ECU's, Electronics, and Tuning' started by 4gH22, Nov 5, 2007.

  1. 4gH22

    4gH22 New Member

    Messages:
    24
    Likes Received:
    0
    Joined:
    Aug 29, 2007
    Location:
    Jacksonville, FL
    Swapped a jdm zc into a 91 dx hatch. Bought a pm6 ecu did the mpfi swap on the dx harness got all sensors wired, and injectors working no codes. Im not getting any power from the dizzy plug and the engine harness. I have pulled the harness out and completely unwrapped it to ohm out every wire. They are good still no power to dizzy. When I unhook the grounds at the thermostat i get power to my dizzy but no spark. Could this mean I have an ecu issue, or can I go after market ignition with new msd dizzy, cap, coil, and ignition box please.
     
    Last edited: Nov 7, 2007
  2. dacheat

    dacheat ..is grounded.

    Messages:
    4,216
    Likes Received:
    205
    Joined:
    Jul 7, 2007
    Location:
    strongbadia
    this post makes my head hurt. maybe try breaking it into sentences, and maybe even a coupla paragraphs?

    wtf, over.
     
Verification:
Draft saved Draft deleted

Share This Page