Recent content by 89hatchd15b

Can someone tell me if a 2004 civic dx with a d17a1 has an egr valve? Long story short I changed the computer in the process of finding out about the wiring and now I am getting an egr code (P0404). My manual is telling me that only the d17a2 has an egr, did the wrecking yard give me a wrong...

In case anyone cares, the problem was someone had changed the engine harness to a previous model year and it was set up for a narrow band but the computer was looking for a wide-band. I just had to change/add some wires in the right spots.

I am working on a 2004 civic dx with the d17A1 engine. The car was giving me 2 codes, 2770 and 135. 2770 was an easy wire fix; but I can't locate the problem to fix 135(heater circuit malfunction primary o2 sensor).I have replaced the ground wire from the sensor to the ecu because there was a...

Yea found that out, I was doing this swap for a friend that doesn't know crap about cars. He said he got the right engine and obviously he didn't. I got it in the car and done around midnight last night for him, I did what you are suggesting about moving the camshaft bearings. Just hope it...

did alot more searching and found out i need one from 86-87 integra. think I am going to try and modify the 89 one that I have unless someone know this will not work

I have an obd0 dohc zc engine. That I am putting in a 89 integra. The zc distributor is different from the d16a1 distributor, plugs and bolt "tangs" as well as overall size. The zc distributor also has vacuum lines going to it from the intake manifold. If I am going to put the d16a1 distributor...

So I was planning on using the distributor from the Integra on the dohc zc but the bolt holes don't line up, can I "make it fit" or should I use the dohc zc one? I don't want to do that because they just cut the wires and it is also vacuum operated and I am planning on using the intake from the...

Looking good! those Integras are pretty

very important when learning

It took a couple of days. It is a decent amount of work. I wish I had a tungsten carbide bit for my dremel and my dads arc welder. I just had a Lincoln mig and the grinding stones that come with the dremel. I am planning on finishing it up on on Thursday. I have been kinda busy this last week...

Ok I will take some more pics if I get home before the sun goes down this week otherwise I will do it this weekend. Thanks for the support guys! Its one of those things that keep ya working!

No I am going to get some 88/89 door panels that are for the pillar mounted belts, I have the passenger side from my parts car but the driver side is fubar. Also to make the door look right I have to weld some sort of cover for were the upper mount bolts are. Shouldn't be hard though just find...

It is a place on 11th street east behind a janky gas station, I could show up with you if you want. He knows my whole family and remembers us every time we go in there. Yet we don't know each others names..lol. The diesel program at wyotech was good, they had all kinds of cutaways and...

ROOR time=)...... uploading pictures....... still uploading pictures...... so I got theml in. all I have to do is get new door panels and pull the old belts out to make it complete. guess I better start calling junk yards... Well enough with the talk here are some pictures. wtf is with the...

break for a cigarette. all I have to do is put the rear seat in!!! finish coming soon