Recent content by 97hatch

  1. 9

    Psi for slicks?

    i run my slicks at 5.5-7psi my car runs 9s and makes 800hp+
  2. 9

    b16 cable tranny

    where are you located i could rebuild it if your not to far away
  3. 9

    Finaly got my car in the 9s :)

    yes and im using 72% of these garden hoses lol im going to get a billet precision 6765and turn the boost up this winter and hopefully i can turn the fuel pressure to get enuff fuel as i dont want to spend $900 on a set of Injector Dynamics 2000cc injectors
  4. 9

    Finaly got my car in the 9s :)

    First thing i did was make a 4in Aluminum exhaust for it it was open down pipe when i got it Then decided to do somecrankcase ventilation it didnt have any thing and it kept pushing oil out the turbo seals I made the catch can my self it has 4 -10 lines from the valve cover and a -8 drain to...
  5. 9

    Finaly got my car in the 9s :)

    ERL Sleeved B18C1 ERL full main girdle 10:1 JE pistions 84mm Manley Rods Stock Crank Port Flow B16 Head Skunk2 Pro1 intake cam and CTR exhaust cam. Works verry well. Full Race Intake Manifold 1600cc precision injectors Aeromotive A1000 platnium pump Golden eagle fuel rail -10 fuel line -6...
  6. 9

    Finaly got my car in the 9s :)

    more pics to come of all the updates
  7. 9

    Finaly got my car in the 9s :)

    Here are the build pics that i have didnt take many. I bought the car 01/8/10 from someone on honda-tech and have practially redone the whole thing my self since then. How it looked the day i brought it home from Chicago. The Engine Bay First thing i did was dyno it at work and see...
  8. 9

    Finaly got my car in the 9s :)

    i will post some build pics/specs for you all here soon. yes the car actually makes 704whp at 8900rpm and 468tq at 6700rpm it is a 2.0 ERL sleeved gsr block with a 67mm turbo at 30lbs on q16
  9. 9

    Finaly got my car in the 9s :)

    YouTube - Shane's Honda clicking off a 9 second pass after trying all summer and changing lots of things around i got this thing down the track well.
  10. 9

    straight pipe

    dude your in cali and you are going to cut your cat off are you insane ????
  11. 9

    Motor Mount Inserts

    all of the torque mounts are in clued in the kit the rear and 2 front is what it will have
  12. 9

    What's it worth $$

    J-ust E-mpty E-very P-ocket I have owned 3 of them a CJ, YJ and a TJ all are fun but expensive to maintain because you break them all the time
  13. 9

    How to identify year of b16 head issue.......

    not true some pr3 heads are ctr/itr the type r heads are hand picked at the time of assembly and factory porting. so these heads all have the b16 pr3 casting #
  14. 9

    input on dirt track swap

    i would one up that guy with a b20vtec that has some regrind cams and figure out which trans gives you the best gear ratio for the track
  15. 9

    tial wastegate?

    looks like a clone tial to me hade one just like it on a old egay turbo kit but it did work good just not worth 125 if its not a real tial
Back
Top