By the way I would like to add that I used to own a modified (normally aspirated) JDM Spec Honda Civic 1.5 sohc Vtec with the stock ecu and speed limiter. When I used to drive it into the speed limiter I really smashed into it in the sense it stopped accelerating abruptly and it pushed me...
I got the same idea as you that as my gearbox has a slightly higher 4th gear. Also as my 1st 2nd and 3rd gears are lowwer than the JDM 96 spec and I have a slightly higher 4th gear, I thought I must be getting on low revs when i change from 3rd to 4th. In fact I changed my 4th gear to the 1.107...
I own a European Spec Honda Integra Type R (1998) with the B18C6 engine.
I use my Integra for drag racing. I've got the stock ECU and on the dyno I get 250 bhp in 3rd gear. When I try it on the road i get some wheelspin in 3rd gear with semi slicks. I have a very low gearbox because I've...
I own a B18C6 engine (Euro Spec Integra Type R 1998) and the head's chambers have been welded and then cloverleaf shaped. The compression has been increased from 11.1 to 11.5. This is a slight increase, but the knock sensor is retarding my ignition and I lost lot's of power.
The local gas...
:rolleyes: If I keep my standard B18C Type R con rods but change to 84mm forged pistons (with resleeved block) how much nitrous can the engine take without breaking the con rods?
Also if I change the con rod bolts to ARP bolts will they withstand more nitro?
Thanks
:spin: I'm thinking about resleeving and boring my B18C engine block to 84mm. Will forged pistons made for the B20 engine fit my new engine block and standard con rods?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.