Recent content by je power

  1. J

    Bring back nopi

    i got to go to one event. It was in leister new york its my local track. It was fucking awesome. my dad is a huge v8 fan and he thinks all imports are slow and this put him in his place. Its a little mean to say but o well all v8 fans should just jump off a cliff
  2. J

    Bring back nopi

    idk about you guys but I miss nopi. Im pretty sure NHRA bought them out because alot of the guys run in the extreme 10.5 class. or they moved to the idrc either way i miss it.
  3. J

    what head should i use?

    I will measure my rods when I get home tonight. I was only gunna shave the head .005 and the block the same. Im having my head ported and polished so im not to worried about flow.
  4. J

    what head should i use?

    im only going for around 350hp. i guess i could just get away with shaving the head for the compression. thanks for the input guys
  5. J

    what head should i use?

    im doin a vitara build. im usin a z6 block and crank with tuner toy rods. i want the highier compression so i was thinking about usin the y8 head because of the smaller chambers. but the z6 head flows better at higher rpm. if someone can help me on choosin a head that would be awesome thanks
  6. J

    y8 oil pump

    its a toga high volume pump on horsepowerfreaks.com and its $209
  7. J

    y8 oil pump

    ok so shoul i have it shim or buy a high out put oil pump? i think it would be worth the money the oil pump i found was for like 205 so its not to much
  8. J

    y8 oil pump

    Ive done some research and i cant find the answer. Can i use a z6 oil pump on a y8? I dont no how shim it but i can port. please help me out...o and what oil pan will i have to run?
  9. J

    how much can my sleeves take with a block gaurd?

    alright well 250 it is. thanks for all the help guys
  10. J

    how much can my sleeves take with a block gaurd?

    Ive seen tons of videos of them but I been tryin to find out what is the limit the most I seen was 600 which is a lil bit to much for me. they are cast and i dont want them to shatter on me if I detnate or some bullshit
  11. J

    how much can my sleeves take with a block gaurd?

    so I think 250 to 275 would be a good goal to shoot for. its not crazy high but it might be pushing it
  12. J

    how much can my sleeves take with a block gaurd?

    i forgot to add this is a vitara build
  13. J

    how much can my sleeves take with a block gaurd?

    alright thanks for the pointers. but heres my next question what do you guys think i should limit my boost to with out using a block gaurd.like would 15 to 17 be pushing it?
  14. J

    how much can my sleeves take with a block gaurd?

    this is how i found out my power goals. 20psi x 98 x 8200 / 2 / 396000 = 29.29 per psi then i did 20 x 29.29 = 405.85 and that should be my horse power at the fly wheel and im looking to get 400whp so im hoping to find a good tune to help me hit that goal
  15. J

    how much can my sleeves take with a block gaurd?

    Im not sure what size it is. Its a holset not sure which one im thinking its a hx30.
Back
Top