Recent content by josh_crewdson@y

  1. josh_crewdson@y

    distributor problem?

    If the top end isnt moving, the timing belt is probably broken.
  2. josh_crewdson@y

    circumferential cylinder gouge

    Thrust washers come to mind.
  3. josh_crewdson@y

    90 teg issues FIXED!!!!

    Does the cell come on and go back off when you turn the key to the on position? Make sure the tps and map sensor plugs aren't mixed up.
  4. josh_crewdson@y

    H22 swap...88 EF details

    Explicit ^
  5. josh_crewdson@y

    H22 swap...88 EF details

    I had a 3 month wait for a traction bar on my civic. to make a long story short, I disputed it with PayPal and got my money back 7 months later.
  6. josh_crewdson@y

    H22a engine bogs and wont go pass 2000

    Usually turns out to be something simple. I've seen that happen too many times. Lol
  7. josh_crewdson@y

    Replaced the head gasket but when the machine assembled back, it won't turn over

    Check your grounds. Especially the one on the t-stat housing.
  8. josh_crewdson@y

    H22a engine bogs and wont go pass 2000

    Does the light come on and go off when you turn the key on?
  9. josh_crewdson@y

    H22a engine bogs and wont go pass 2000

    That's because you're running an obd1 ecu. There is a two pin plug in a rubber cap located above the ecu under the dash on the passenger side. Put a paperclip across the two pins and watch the check engine light on the dash. Use this link for help: OBD 1 CEL codes...here....
  10. josh_crewdson@y

    H22a engine bogs and wont go pass 2000

    Is the check engine light on? If so, what codes is it throwing?
  11. josh_crewdson@y

    H22a engine bogs and wont go pass 2000

    I have an 01 h22 type s running its 01 obd2 ecu in my 99 ex. No injector resistor box. Only US OBD2 ECU'S use a secondary o2. What do you need to hook up to the intake manifold vacuum? All I have is my brake booster to its own nipple, evap canister to the evap purge solenoid, cruise control to...
  12. josh_crewdson@y

    H22a engine bogs and wont go pass 2000

    Why do you have a resistor box wired in? as far as I know, obd2 H's don't need them with the stock injectors. My h22 type s doesn't have one.
  13. josh_crewdson@y

    Honda Ignition Coils

    If it bolts in like the other one, and has the correct resistance value; I'd use it.
  14. josh_crewdson@y

    b18b1 swap into 98 ex

    Spark plug wires in the correct order?
  15. josh_crewdson@y

    4wd EG Conversion

    Well, I know Matt Malloy. if there's a way to do it, it will get done. This should turn out good.
Back
Top