Well my tranny had a big ass hole in the housing when i got it, so i had it welded and they did a good job, but after awhile i think it will give, so i want a new bell housing.
I need a ned housing/bell housing/case for my B18C's tranny. I think the tranny is S80 or maybe Y80 (It don't have LSD). I just need the housing, does anyone know ANY place where i could buy one? Also could i use the bell housing off any other tranny, like a B18A or B18B tranny? THANKS!
-Cody
I am getting ready for my new Rev Hard turbo kit this spring and i was planning on buying a set of Performance axles. I was wondering what all of you recommend. I have a 92 Civic CX with a JDM B18C (gsr) that the turbo is going on, so i want some strong axles. Thanks!
Which do you choose and why? Also if you choose aftermarket please tell me what brand you would go with.
P.S. The reason i ask is because i took my head off to replace my headgasket and to put in new headstuds to get ready for the Rev Hard kit this spring.(Its going on my JDM B18C GSR...
I have a JDM B18C in my 92 Hatch, and i am about to take the head off in about a week to have it ported, so i thought i would build the block a little too. I am getting the Rev Hard 2C kit this spring and i am planning to run between 8-12 psi. I just wanna put in a block gaurd, arp head studs...
I know this will sound really stupid but when people talk about turbos they always say like To3/To4e or watever...I know that the numbers are the different sizes between the compression wheel and the exhaust wheel. So my questions/questions are...What does the "T" stand for(turbo?)? What do the...
I have a JDM B18C in my 92 Civic CX hatch. I am planning on buying a RevHard stage 2 turbo kit this spring...now i need to know what i will need to make this set up hold 8-10 psi daily driven and also be reliable.
All i ask is for you guys/gals to fill in the blanks...
1.Pistons-
2.Rods-...
I just want an average psi. I know every motor is different because of wear and tear. The reason i am asking is because i am thinking about buying the rev hard stage 2 kit for the gsr in my 92 civic cx hatch. Also i will still be using the car as a daily driver so i want it to stay reliable for...
I was wondering if anyone had a turbo'ed B18C because im curious what king of times they run and at what psi? Also what kind of car it is in (hatch,coupe,four door)? Also what brand of turbocharger is it your running and what are all your mods? Thanks 4 any replys!
I am wondering if anybody knows a web site/sites were i can read up on turbochargers. I want to to know every little thing about them. Specificly i would like to learn more about turbos that are compatible with hondas. Which brand is the best, ect. THANKS!
I just ordered the whole Energy Suspension Polyurathane Bushings kit for my 92 Civic CX Hatchback. My question is, Do i need a bearing/bushing press of some type to install them? Or can i push them in where they go by hand? Also on a 1 to 10 scale what would you rate this install, 10 being VERY...
I was wondering if it would work because some Integras(older ones 90-93) mount to the black booster differently. I mean where the two 12mm bolts go through th M/S the right bolt is angled in the upper right of the booster and the left bolt is angled in the lower left of the booster. As where the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.