Recent content by powerdriverh22

  1. P

    wtb h22a engine

    ill put a feeler out there. 1994 JDM h22a, ported head, polished combustion chambers, stainless steel flat valves, Skunk 2 pro 1 cams, Skunk2 Pro cam gears, Skunk2 valvetrain, Blacktrax intake manifold, Precision 780cc injectors (ready for nitrous and e85), Hytech rep header, euro r tb bored...
  2. P

    2.7 engine swap

    no and no, there is no use. the 2.7 is crap and so is the j30 in those cars. scrap it and get a 4 banger to put an h22 or something in.
  3. P

    h22 in a ek

    buy my h22....then you dont need to worry about buying many parts
  4. P

    96 Accord F22B1 to H22A Swap

    this is false information. the accord mount will work, you may have to shave a little off of the guide (you will see it when you get it in the car). you can do it with a grinder or band saw. You may need the throttle bracket but you do not need the pedal or cable. you can make all of the...
  5. P

    2.7 engine swap

    I am sure you could but that is more work than it would be worth. Not only would you have to make all of the mounts etc you would have to figure out the drive line set up for cv shafts and all of the wiring....besides those motors are turds.
  6. P

    95 accord h22a swap HELP!!

    make sure you have the firing order right. if you have spark, fuel and it is in time you could either have the distributor out 180 degrees or you have the spark plug wires out of sequence.
  7. P

    need help on needed parts for h22a swap for 94 honda accord ex swap

    holy crap that is an old thread.
  8. P

    95 accord h22a swap HELP!!

    if you have spark and fuel then your timing is off. That is the wrong manifold but that should not affect the car being able to start.
  9. P

    H22 no power

    You obviously have no idea what you are talking about. The h23 gets more displacement thanks to a longer stroke on the crank. The cylinders are made from the same material...FRM. Of course they have different heads. One is a vtec head the other is non vtec but the heads have nothing to do...
  10. P

    95 accord h22a swap HELP!!

    do you have fuel?
  11. P

    H22 no power

    the motor will handle the boost just fine. the h22 and h23 blocks are made of the same material...frm sleeves. the weak points for both are the ring lands and rod bolts. keep it to 300whp and you will be fine.
  12. P

    Honda accord swap

    fast idle control valve is probably causing the high idle. check your linkage to make sure that it isnt pinched.
  13. P

    H22 no power

    im using my stock pump. unless the fuel pump is bad that is not going to help.
  14. P

    H22 no power

    well if you used an h22 ecu then tuning isnt the issue. you need to figure out why it is over heating for starters.
  15. P

    H22 no power

    is the p28 chipped? if not you are running a civic fuel/ignition map on your prelude. Sounds like it needs a tune. use the stock p13 until you get some tuning software
Back
Top