Recent content by skillz2k5

  1. skillz2k5

    '88 CRX SI and a B16A2.

    The axles are in my parents shed but I will go snap some pics for you tomorrow. As far as the gsr intake mani I dont believe it will fit... could be wrong but I know for a fact the ITR does and there is even a write up posted. I've heard that the ITR intake mani, the CTR intake cam and the...
  2. skillz2k5

    '88 CRX SI and a B16A2.

    The first link you posted is the incorrect setup. You want the COMPLETE swap not just the motor trans and ecu. USE HMOTORSONLINE.COM I have never heard one damn complaint out of that website. Also a company I think called onaka? someone correct me if I am wrong sells the mounts you need on...
  3. skillz2k5

    '88 CRX SI and a B16A2.

    Yeah and I dont think the average zc swapped rex is going to touch it. Dont buy a zc if you have the money for a b16... vtec isn't the only difference.
  4. skillz2k5

    '88 CRX SI and a B16A2.

    First off I bought my swap from that place and got ripped the fuck off. Specializing in JDM-USDM Engines & Parts...hmotorsonline.com to get your swap. Some guy on here is also selling swaps at a good price and I think most people have been happy with him from what I read. As far as what you...
  5. skillz2k5

    '88 CRX SI and a B16A2.

    What you want is a b16a SiR I. It matches the obd version of your vehicle and is a pretty straight forward swap or if you wanted 1.8 liters then you could go with a b18a1 from a 90 to 91 integra so the obd versions aslo match. Keep in mind that the b18a1 isn't veeetek y0.
  6. skillz2k5

    b18a1 into 89 civic si swap questions

    We did the same swap in an 88 dx but we went from auto to manual so I couldn't tell you specifics about the shift linkage but you will have to order something custom I believe. We ended up getting after market linkage and solid mounts. Also it's a pretty tight fit so you will have to beat in...
  7. skillz2k5

    b18 LS block on a 99 si

    Well you are going to have a lot less work on your hands with a 2k gsr swap but you're not going to put down near as much power. That ls block with some p30 pistons and the head setup you are talking about would be pretty beefy without spending a ton of cash. You'll also need slightly bigger...
  8. skillz2k5

    PR3 ECU Question

    I'm guessing all that stuff should be the same since it's for the same exact engine... the redline may be different but I doubt it.
  9. skillz2k5

    b18 LS block on a 99 si

    Not to be a total dick here or anything but did you read that write up at all?? LS pistons do not have large enough reliefs for the intake valves.
  10. skillz2k5

    b18 LS block on a 99 si

    Here is the link to the information you are looking for https://hondaswap.com/general-tech-articles/assembling-ls-vtec-32829/ Also that website is over priced, I have seen the exact same kit for over 60 dollars less. Do some searching for prices, I have also heard that people wind up getting...
  11. skillz2k5

    b18a1 problems

    bump
  12. skillz2k5

    b18a1 problems

    hmmmm... never crossed my mind. Thanks for the suggestion. Anyone know if the main relay from ninety teg will work in a ninety two??
  13. skillz2k5

    B16 SiR II into a 92 Civic Dx Hatch question (Wiring VTEC?)

    There is also a very detailed write up on this lurking some where in the depths of hondaswap. I'd post a link but I'm lazy and apparently so is your ability to search :p EDIT: I'm having a bad day maybe this will help with yours https://hondaswap.com/general-tech-articles/how-wire-vtec-40811/
  14. skillz2k5

    b18a1 problems

    Okay so I swapped dizzies and now I have spark. Fuel pressure is good. The car started twice, both times for about three seconds or less and died. Then the battery seemed dead and wasn't turning over very well. So we tried to jump and nothing. Car is back to turning over and nothing else...
  15. skillz2k5

    b18a1 problems

    Well I have an obd0 b series dizzy that I could change the plugs on so I dont have to waste money but dont know if it will fit. As far as I know it's for the b18a1 and the only difference is obd so I could just rewire the plugs to fit. Any thoughts about this??
Top