Recent content by welfare

Sold it today, sorry.

Bump, come on, no offers?

Lol, Def Not a noob, and plenty of pics.???

Time to put back up for sale. Trade for excellent condition sport bike, cbr 600rr/1000rr or yamaha r6/r1

Too bad you're in maine otherwise you could drive it down and id fix it for ya.

That evap hose wont cause an engine vacuum leak unless it was coming off the throttle body and you'd hear it leak, but its only off the canister, so no. The leak you're looking for is on the manifold somewhere I'm sure of it. There has to be something you're overlooking. So just keep searching.

Bumpity

tttt

Deleted old msgs

SOLD SOLD SOLD Looking to sell my right hand drive converted eg hatchback, wondering what someone might pay for it. Asking price is 7500. firewall swap conversion to right hand drive, done by cutting spot welds then re-welding in the jdm firewall, seam sealed with very expensive 3m seam sealer...

If the pump is leaking then either the crank seal is bad or someone had the pump off the block and didn't seal it properly when they put it back on. Either way I'd get some high temp rtv and seal it back up with a light coat. While the pump is off you might wanna get it looked at... usually...

I wouldn't worry about it, the fuel maps aren't that much diffrent.

1. will that ecu work with mine? Get a jdm p30 obd1 ecu 2.will i need new shifting linages? yes, 94-01 integra 3. will i need a cx-bseries harness from rywire? no, all 92 civics are pre-wired for vtec/etc. But you will need a 94-95 integra gsr engine harness, or use your Cx harness and add...

The automatic bracket works with some modification to the middle and lower bolt holes, but I wouldn't do it unless u had to, just get a 94-01 integra manual bracket. If you don't use a rear bracket it'll pull your shift linkage out of its mount and make it difficult to shift. As far as your...

Jackson racing superchargers do not require any type of external cooling, even if you do a setup that directs airflow over the body of the manifold or the charger itself you are wasting your time. The only 2 ways to cool the jrsc is water/meth or lht, on the stock charger with 8-10psi you are...