Search results

  1. N

    03 si acc belt

    Helping a friend work on his 03 si. Need help installing the acc belt. We know that there is an auto tensioner, but how do you loosen it?
  2. N

    My friends 280z! Help!!

    Well here is the situation, they were driving in third gear and the car starts to bog or sputter on them. Before the car pulled over, they said that they saw some black smoke coming out of the tailpipe. Now the motor would turn over but not start up... I haven't been able to look at the car...
  3. N

    My friends 280z! Help!!

    Well here is the situation, they were driving in third gear and the car starts to bog or sputter on them. Before the car pulled over, they said that they saw some black smoke coming out of the tailpipe. Now the motor would turn over but not start up... I haven't been able to look at the car...
  4. N

    EK rear disk swap

    95 4dr ex rear disk -----> 96 4dr lx My question is will everything swap over for the rear disk conversion? I know that parts from a 94+ integra would fit but for the 92+ civics, I'm not completly sure. If the do fit, what would you recomend my pulling out of this car before it gets junked.
  5. N

    Completely no power to car

    OK, I got a 96 lx (mod list are in the sig). I am not getting any power from my battery, no lights, no beep, no clicks, nothing. Its like a dead battery, I go and try to jump the damn thing and still the same. Not even getting any power from the other car. I would at least get some power to...
  6. N

    Want to upgrade radiator,

    Want to upgrade my radiator this year hopefuly. My mods are in my sig. Got an 96 lx, would like to upgrade an oem part in to the car if easyer and cheaper. If not then i'll have to go aftermarket. Heard someone said that DOCH delsol radiator would fit in and something about auto EX radiators...
  7. N

    A/C Q's

    I have a 96 civic LX, Did a B series swap in it and want to use the A/C system again. I need a B series compressor to make this work, but I don't know which hose to use. I don't have a 99-00 SI to look from so I'm not sure. I havn't gotten a compressor yet so I can't test fit the stock hoses...
  8. N

    Skunk2 Camshafts

    I've got some camshafts that I'm not sure what they are. :( They look like skunk2 but seller said that they were CTR(intake) and ITR(exhaust) camshafts. I know for sure that there not CTR/ITR cams is that they don't have any of the rings/cuts at the end of the cams. Seller is not sure either...
  9. N

    Type R throttle cable,

    Might need to get one of these, was wondering if it would fit into a civic (96 lx). Asking because I know the GSR ones don't fit, wondering if they are differient. I have an ITR IM, getto/custom rigged my stock one to fit for now. Preffer to have a real nice fitting one.
  10. N

    Hondata Manifold Gasket........

    Was wondering if the hondata gasket was worth the money. Anyone with any results that they wanna share? Was thinking about getting one but don't know who sells them. Were to get one?
  11. N

    Dizzy ?'s

    Just as title says, I'm having trouble with my swap. Running OBDIIa, but I have a 99-00 si dizzy installed. Wondering if 96-01 gsr are different. Same? Different? Help? :worthy:
  12. N

    LS/Vtec build.......NEED HELP!

    OK, here is the inportant mods on the motor: B16 head with .15 milled and PnP on intake B18a Block with .10 redeck Pr3 pistons JDM ITR intake man. Erics Racing 70mm throttle GSR Fuel Rail 96 LX Ruel Line Stock LX injectors -(tell me if you need more mods listed) Car is 96 civic lx lx harness...
  13. N

    Block oil jet.....leak?

    Ok, was putting LS/Vtec together and when all was done, I realised that I forgot the rubber O ring for the oil jet. :angry: The oil jet that i'm talking about is the jet between cylinders 2 and 3, between the block and the head. There is a rubber O ring that goes around the jet. My question...
  14. N

    Need vtec pin out!!!

    Ok, I have a 96 JDM P73 Type R ecu. I have a 96 non-vtec engine wire harness. I need the pin out for all the vtec parts and was wondering if this ecu has knock sensor? If it does then I need pin out for that also. I'm not sure if all the OBDIIa are the same, if the GSRs and EXs are the same...
  15. N

    Want to keep a/c, which to use?

    OK, been asked here thousand times before, but couldn't find any old threads. :worthy: I have a 96 lx with a soon to be ls/vtec, I want to keep the a/c. Which a/c mount to I use and which compressor to use also. If there is any other parts that I need, please tell me too. Thanks
  16. N

    WTB B16A2 99-00 SI Engine Block mount

    Just as title says, WTB 99-00 engine block mount. Is you did a 99-00 B16 swap into one of your EG and don't need this mount, sell it to me! Need this mount to fit in the EK or 96+ civic B-series swap. Email me or PM me. noobvang@yahoo.com
  17. N

    Arp Head Studs

    Putting ls/vtec together with ARP head studs. Went looking in there site for some specs but came up nothing. Would like to know how much should I tourqe the head studs. Should I go factory spec? (63 ft/lbs.)
  18. N

    Valve Clearence Issue?

    Ok, heres the set up. Your typical mild ls/vtec build: B18a w/ ls crank ls rods pr3 pistons redecked block to .010 b16 head milled/ resurface .15 CTR intake cam ITR exhauste cam OEM 3 layer head gasket The question is: Is there going to be any valve to piston clearence problems? And am I...
  19. Try your Search on Google

Top