Search results

  1. dc4dude

    slight vibration felt from 30-40 mph...

    i have searched and searched and searched..... started to get a vibration at about 30mph under acceleration and it goes to about 40 mph, then goes awayat about 50... i have changed the intermediate shaft, both front axles, (with new quality pieces, and shitty ones for comparison) main bearings...
  2. dc4dude

    Tokico illumas vs koni yellows?

    Like the title says gentlemen, tokico illumas or koni yellows. They are about the same price for my integra, ill be putting them on itr coils. Just the front for now. Go!
  3. dc4dude

    B&M vs. Skunk2 short shifter....

    For christmas, my lovely wife got me a B&M short shifter for my integra... In my last one, i had a skunk2 short shifter and i was very happy with it... The wife asked a friend of hers what kind of shifter she should get me, and her friend being a mustang fan, suggested b&m... The main difference...
  4. dc4dude

    midwest wintertime prep... what's yours..

    although we are pretty deep in november already, we have yet to have any measurable snow here in chicago... im not complaining... as we are having mid 50 degree days at this time, and it has seldome gone under freezing temperatures.... so far... but it is time for my winter time preparation...
  5. dc4dude

    b18b1 integra all motor "mild" build

    I was motivated by my recent drag strip visit to try and get mo' power out of my car... and while doing some research...i came to find that i dont have to succumb to the vtec gods just yet!! i already have the b18b out of my last integra as a spare. it's complete, and already has arp head studs...
  6. dc4dude

    auto to manual conversion...

    so ive done a few auto to manual conversions in the years past, i am familiar with the parts and processes involved in doing them... but i have never attempted to convert the actual shifter opening... anyone have experience with swapping over the opening for the shifter? im pretty sure there...
  7. dc4dude

    new dc4 build... first one documented

    so my 97 integra got stolen... a month ago tomorrow...:mad: i built it over the last six years.. so it's taken a pretty emotional toll on me...:( i had that car thru the good and the bad.. drove both my kids home from the hospital in it.. and now its gone.. there have been alot of cars stolen...
  8. dc4dude

    gsr auto trans?

    so i have looked around and found nothing.. is it true that there is a jdm GSR automatic trans? id like to put one in the wife's 01 integra. going to have to, my integra got stolen last weekend, and her trans is starting to slip... and i REFUSE to put another sluggish slushbox in it!!! cant...
  9. dc4dude

    want to buy integra type r front spring

    hey guys, i want to buy (1) integra type r front spring. i know its a tall order, but i have the other three that are still decent. chicago's wonderful potholes caused me to break a spring and rupture the strut. i will replace the struts as a pair, but want need to save some cash, and trying to...
  10. dc4dude

    IL need a front integra type r spring!!!!!

    ok, so i bought what i thought was a complete set of used oem type r springs and struts, rear lca's.... and i found that one of the front ones is a rs-r unit... i cant find just one rs-r spring... so ill try and find one type r spring!!!! can anyone help with this?!?! or steer me into the right...
  11. dc4dude

    suspension mods and alignment settings... what ya got?

    ok honda swappers, want to see what suggetions/comment you guys have on my setup so far... its a 97 acura integra, sitting on itr springs/tokico (blue) stuts. skunk2 pro series camber kit up front, spc camber/toe kit out back(works awesome). energy suspension bushing everywhere possible...
  12. dc4dude

    b20 swap done, transmission options or suggestions????

    ok guys, i know we all like to see pictures, and the install progress... all that will come soon... i just finished my b20 swap on my 97 integra. it's the lowly rs model.. i currently have a worn out lsd itr trans in it, and have a spare itr trans and a "fresh" hydro b16 trans as spares... im...
  13. dc4dude

    engine swap opinions... what to go with???

    ok dudes, here goes... i noticed my car cranking kinda funny a couple weeks back... didnt think much of it... then it started having a flashing cel while idling... had a cyl 3 misfire... so i swapped out the spark plugs, and they were looking worn out... no big deal, swap in a new set of iridium...
  14. dc4dude

    b18a1 to b18b1

    ok guys, here goes, i have a 97 acura integra with 165,000 miles on it, car still pulls decent, engine is mostly stock, had the head cut to replace a badly diagnosed head gasket..... (sigh)... but burns a TON of oil!!! i drive 64 miles one way to work 5 days a week and go thru about a quart of...
  15. dc4dude

    type r long block for sale/trade?

    i have a type r (b18c) longblock for sale/trade. it belonged to a customer of mine. he brought his 95 gsr integra, complaining about smoking and oil consumption. we swapped out his type r for a stock gsr engine and trans. the plans were to rebuild the type r engine and trans. well, funds dried...
  16. dc4dude

    auto to manual DA integra

    so i'm planing on coverting my 92 da integra from auto to manual, and need some pointers. i've done it on 92-95 civics where you have to drill out and weld in the top trans mount. i've never done it to a da integra. anyone have any info on this swap? how straightforewards is it? also, do i...
  17. dc4dude

    integra seat swap

    i have a 97 acura integra (rs) 2 door coupe with fairly worn out seats. i use it as my toy. my daily is a 92 acura integra (ls) 2 door coupe. the 92 had 50,000 miles when i got it. the interior is awesome!!! the 97 has 150,000 miles and the interior is getting pretty rough. i've bought new...
  18. dc4dude

    b16 pistons in a b18

    i have a b18b1 in a 97 integra. i have a set of b16 (pr3) pistons i want to put in the b18. what mods do i have to do in order to acheive this? do i just toss them in? rods and all? what compression ratio am i going to be looking at? i am keeping it non-vtec, not looking for crazy power, just a...
  19. dc4dude

    clogged filter... fuel pump death???

    ok, so i changed the gas tank in my car (1997 acura integra, RS b18b1, manual)last june... didn't change the filter.... my car died out recently, but i ruled out the fuel filter... because i had replaced it about a year and a half before i changed my tank.... so now that my car is sitting there...
  20. dc4dude

    valve cover breather upgrade?

    :confused::confused:is it true that if you add a pump that will pull vacuum through an engine's valve cover, and essentially from under the piston, can add horse power? my friend is an old hot rodder, he has a 528 bb chevy that has an angle cut 3/8 inch pipe that goes from his headers...
  21. Try your Search on Google

Top