Search results

  1. R

    91 integra climate control

    Before i get to far with this. The car is a 1992 acura integra ls with a b18b1 swap. I still have the b18a1 but its completely torn down and ready for rebuild. I swapped in the b18b1 just to get it running and drivable. Just in case something happens to my 91 civic SI. I will be using the old...
  2. R

    91 integra climate control

    I have checked all the under hood fused and they tested good. I'm not sure about the relays. I think the a/c relays in the engine bay are gone but I'm not sure. This is my first integra to ever work on and so far my chiltons book is proving to be worthless. doesn't cover anything I'm doing...
  3. R

    91 integra climate control

    Hello I recently got a 1992 acura integra ls from my cousin. The issue I'm having is the climate control and the radio have no power. Neither of them are even getting power at the under dash fuse panel I believe. The climate control system will not turn on and some of the elimination lights...
  4. R

    eg civic s1 transmission

    I know and sorry for being an ass. But thanks for your idea on the axles. I may end up trying that if I can't figure out something else.
  5. R

    eg civic s1 transmission

    I realize that I have to convert the clutch. As well as the speedometer. I'm not a complete idiot..Now as far as legality goes..lmao I honestly could care less. The civic hasn't had an inspection in almost 9years and is a bare frame. The motor has never passed a smog test( besides they don't...
  6. R

    eg civic s1 transmission

    Ok I'm having problems finding info or DIY on swaying a obd0 s1 transmission into a 92-95 civic. The issue I'm having is what axles to use. Do I need to use axles fron the 90-93 da integra or should I use axles from the del sol with the b16a2 or from the 94-00 dc integra. I don't know which...
  7. R

    k20z3 valve train question

    The main reason I want to sway is because. I'm pretty sure my valves are shot or at least something in my topend has gone bad. My k20z3 in my si is making a loud tapping noise when I start the car after it has been sitting over an hour.
  8. R

    k20z3 valve train question

    Ok so I know that the k20z3 came with single valve springs and since I live in the high rpm area(5000-8000). I was planning to swap to dual springs. But with more and more research I do. I keep finding info about on the k20 dropping valves due to uses of incorrect valve keepers/cotters. I know I...
  9. R

    BSA racing info??

    ok so i just picked up a set of 17' BSA racing rims the other day for my 07 si sedan. it already has a set of 18' that rub like hell cause its also been lowered. i was just wondering if anyone can give me some info on them cause i cant find anything online.
  10. R

    k20z3 broken stud

    Thank you
  11. R

    k20z3 broken stud

    ok so i just picked up a 07 civic si about 2 weeks ago. so far its been a freking headache. its had 3 flat tires and one bent rim in less than a week. all problems due from last owner beating the crap out of the 18's he/she put on the car. anyway the last owner also painted the intake cover an...
  12. R

    93 eg with obdo b16

    i have to pay for shipping which is usualy 250-300 so its not that cheap near me away. guess ill keep looking. the main reason i dont want to swap is cause i liked the gearing of that tanny. but if i have to swap ill probaly just save up and get my hands on a pos tranny and throw complete...
  13. R

    93 eg with obdo b16

    so the if i unbolt the vss from an integra and remove the whole vss assemby from the transmission then in theroy it should bolt up to the obdo tranny.. as far as a transmission swap goes thats out of the question unless theres no other way. i dont have an extra $800-$1300 just sitting around for...
  14. R

    93 eg with obdo b16

    ok so i have a obd0 b16a that is sitting in my old rex just waiting to be swapped. i know hasport makes a cable to hydro conversion but my worrie is on the vvs on the obd1 verses the cable vvs on the obd0.. does anyone have any insight into my problem? i think i can just swap with a vvs from...
  15. R

    91 si struts on eg sedan

    I have a used set of Tokico blues with eibach lowering springs that I pulled of my 91 si and I was wondering if the strut or the springs would fit my 93 sedan. Anyone for any suggestions.
  16. R

    WTB b18 or b16 complete swap

    I've got a obd0 b16a full swap for sale. Hasport mounts, hasport linkage, axes, engine, transmission and obd0 pr3... the engine has skunk 2 pro intake manifold, 72mm throttle body, 4-1 header, blox fuel pressure regulator and exedy 9lbs flywheel. Send me a pm if your interested.
  17. R

    TX FS 1991 crx si part ot

    I would prefer to keep it as a full swap. But what you want to offer
  18. R

    TX FS 1991 crx si part ot

    I have a full obdo B16A swap for sale. It has skunk 2 pro intake manifold, 72mm throttle body, blox fpr, 4-1 header (unknown brand), exedy 9lbs flywheel, MINES VX-Rom pr3 ecu, spoon sports obdo vtec controller, oem axles, hasport shift linkage, hasport motor mounts and hasport vtec sub harness...
  19. R

    MINE'S VX rom

    guess i didn't see that thanks. heres my setup. obd0 b16a, skunk2 manifold, d&h 72mm throttle body, exedy 7lbs flywheel, egay 4-1 "jdm" header, invida n1 cat-back, omni test pipe, tein super street w/o(i added tein pillow mounts but tein says not edfc compatible) nuespeed front upper and rear...
  20. R

    MINE'S VX rom

    hello people. i have a 1991 crx si with a b16a(pretty much bone stock) swap that i did a few years back. anyway back in the day i got my hands on a MINE'S PR3 VX-ROM. i love the ecu but i can not find any information on it. MINE'S web-site doesn't translate for me and i don't speak japanese. a...
  21. Try your Search on Google

Top