Ok if I order new pistons can you suggest to me a part no as I already have bored the block to 82mm. I could not find the appropriate part no on the site. If not assuming I am using the stock cams how much can I mill both the head & the block using the low comp pistons I have.
Will I be...
Thanks for all the prompt replies. One more noob question what is the best way to increase the compression if I have already purchased the pistons by mistake. The exact Part no that I have is JE 242876. Will shaving the head and block address the issue, if so then by how much each is to...
Got a question for the experts out there. How much WHP can you extract from a Normally Aspirated B18C5 swapped into a 1994 EG8 chassis keeping it streetable and running on 91 Oct pump gas.
I am based out of Bombay India and would like to build the above motor here keeping in mind the...
I have a 1994 Civic EG8 which is swapped with a B18C5 motor. I have the instrument cluster shown in the 1st pic currently installed which is not showing correct readings. The RPM overeads by approx 250rpm and the temp guage does not go above the qtr mark even when the actual temp is...
I had exactly the same problem in my car(Honda City swapped with B16A2). What I did was make a cast iron spacer of 2" which fitted on the head and mounted my Blox cast iron manifold on the spacer to create the distance to fit my new turbo T3/T4. I also had 2 options i.e turn the turbo...
@ B - Just noticed the installation sheet which said that I can take a RS 232 cable plug it to my laptop and datalog using Hyper terminal. Will that work.
@Korax - Yes as when the Autometer guage reads e.g 220*F the dash guage is still just below the half mark and when the Autometer reads...
Have done a B16A2 swap in a Honda City here in India which is Turbo Charged and puts out approx 300whp @ 1 bar of boost. Using a stand alone from Tuned iChips based out of Colombo.
Have the follwing issues that I need help with.
1> Existing issue recently installed a AEM Uego digital...
I drive a Honda City in India with a built B16A2 motor having forged internals. I had a Garrett GT2871R link to exact specs and part no given below.
TurboByGarrett.com - Catalog.
Now the problem is that the turbo has packed up and I need to replace the same. Was suggested going in...
Had sent you a pm that i am interested but you did not respond. Need a quote shipped to Mumbai 400005, India. Will gladly take it of your hands. Was looking for a replacement for my busted Garrett GT28BB.
@Madracer _ getting a shipping quote. Will post prices by evening. Whats your offer for the Cams and do you need the adjustable Fidanza gears as well.
Also fund some more stuff for sale.
1> OE Intake Manifold for B16A
2> Golden Eagle lightweight Knife Edge Crankshaft.
3> Ultra Lightweight...
Had a quick question. Have a TC'd B16A swap done in my Honda City here in India and need a new clutch. Was considering a Comp Clutch Stage 3 set with their Ultra Lightweight Flywheel.
The car does about 250 WHP @12psi at present. Would you recommend a lightened flywheel and if not why...
Have the following for sale or exchange as I no longer have need for the same.
1> DC Sport SS headers 4x2x1 (2pc) for B16/B18 used for 1 month.
2> Holley 68 MM Throttle Body for Honda's
3> Highlift Cam for Honda/Acura Twin Cam Vtec B16A, B17A, B18C, B18C5 1992-2000. Camshaft Part...